#!/bin/sh
# $Id$
# Copyright (c) 2008 Eric Hameleers <alien@slackware.com>
# All rights reserved.
#
#   Permission to use, copy, modify, and distribute this software for
#   any purpose with or without fee is hereby granted, provided that
#   the above copyright notice and this permission notice appear in all
#   copies.
#
#   THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
#   WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
#   MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
#   IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
#   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
#   USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
#   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
#   OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
#   OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
#   SUCH DAMAGE.
# -----------------------------------------------------------------------------
#
# Slackware SlackBuild script 
# ===========================
# By:         Eric Hameleers <alien@slackware.com>
# For:        par
# Descr:      a paragraph reformatter, vaguely similar to fmt, but better
# URL:        http://www.nicemice.net/par/
# Needs:      
# Changelog:  
# 1.52-1:    01/Dec/2008 by Eric Hameleers <alien@slackware.com>
#             * Initial build.
# 
# Run 'sh par.SlackBuild --cleanup' to build a Slackware package.
# The package (.tgz) and .txt file as well as build logs are created in /tmp .
# Install it using 'installpkg'. 
#
# -----------------------------------------------------------------------------

# Set initial variables:

PRGNAM=par
VERSION=${VERSION:-1.52}
SRCVER=$(echo $VERSION | tr -d '.')
ARCH=${ARCH:-i486}
BUILD=${BUILD:-1}
TAG=${TAG:-alien}

DOCS="par.doc releasenotes"

# Where do we look for sources?
SRCDIR=$(cd $(dirname $0); pwd)

# Place to build (TMP) package (PKG) and output (OUTPUT) the program:
TMP=${TMP:-/tmp/build}
PKG=$TMP/package-$PRGNAM
OUTPUT=${OUTPUT:-/tmp}

SOURCE="$SRCDIR/Par${SRCVER}.tar.gz"
SRCURL="http://www.nicemice.net/${PRGNAM}/Par${SRCVER}.tar.gz"

##
## --- with a little luck, you won't have to edit below this point --- ##
##

# Exit the script on errors:
set -e
trap 'echo "$0 FAILED at line ${LINENO}" | tee $OUTPUT/error-${PRGNAM}.log' ERR
# Catch unitialized variables:
set -u
P1=${1:-1}

# Slackware 11 and up need other option (gcc > 3.3.x)
if [ $(gcc -dumpversion | tr -d  '.' |cut -c 1-2) -gt 33 ]; then
  MOPT=tune
else
  MOPT=cpu
fi

case "$ARCH" in
  i486)      SLKCFLAGS="-O2 -march=i486 -m${MOPT}=i686"
             SLKLDFLAGS=""; LIBDIRSUFFIX=""
             ;;
  s390)      SLKCFLAGS="-O2"
             SLKLDFLAGS=""; LIBDIRSUFFIX=""
             ;;
  powerpc)   SLKCFLAGS="-O2"
             SLKLDFLAGS=""; LIBDIRSUFFIX=""
             ;;
  x86_64)    SLKCFLAGS="-O2 -fPIC"
             SLKLDFLAGS="-L/usr/lib64"; LIBDIRSUFFIX="64"
             ;;
  athlon-xp) SLKCFLAGS="-march=athlon-xp -O3 -pipe -fomit-frame-pointer"
             SLKLDFLAGS=""; LIBDIRSUFFIX=""
             ;;
esac

# Create working directories:
mkdir -p $OUTPUT          # place for the package to be saved
mkdir -p $TMP/tmp-$PRGNAM # location to build the source
mkdir -p $PKG             # place for the package to be built
rm -rf $PKG/*             # always erase old package's contents
rm -rf $TMP/tmp-$PRGNAM/* # remove the remnants of previous build
rm -rf $OUTPUT/{configure,make,install,error,makepkg}-$PRGNAM.log
                          # remove old log files

# Source file availability:
if ! [ -f ${SOURCE} ]; then
  if ! [ "x${SRCURL}" == "x" ]; then
    # Check if the $SRCDIR is writable at all - if not, download to $OUTPUT
    [ -w "$SRCDIR" ] || SOURCE="$OUTPUT/$(basename $SOURCE)"
    echo "Source '$(basename ${SOURCE})' not available yet..."
    echo "Will download file to $(dirname $SOURCE)"
    wget -nv -T 20 -O "${SOURCE}" "${SRCURL}" || true
    if [ $? -ne 0 -o ! -s "${SOURCE}" ]; then
      echo "Downloading '$(basename ${SOURCE})' failed... aborting the build."
      mv -f "${SOURCE}" "${SOURCE}".FAIL
      exit 1
    fi
  else
    echo "File '$(basename ${SOURCE})' not available... aborting the build."
    exit 1
  fi
fi

if [ "$P1" == "--download" ]; then
  echo "Download complete."
  exit 0
fi

# --- PACKAGE BUILDING ---

echo "++"
echo "|| $PRGNAM-$VERSION"
echo "++"

cd $TMP/tmp-$PRGNAM
echo "Extracting the source archive(s) for $PRGNAM..."
tar -xzvf ${SOURCE}
cd Par${SRCVER}
# Add multibyte (Unicode) support;
# Origin is http://www.sysmic.org/par/par-1.52-i18n.2.patch
cat $SRCDIR/par-1.52-i18n.2.patch | patch -p1 --verbose
chown -R root:root .
chmod -R u+w,go+r-w,a-s .

echo Building ...
export LDFLAGS="$SLKLDFLAGS"
export CXXFLAGS="$SLKCFLAGS"
export CFLAGS="$SLKCFLAGS"

make -f protoMakefile 2>&1 | tee $OUTPUT/make-${PRGNAM}.log
strip --strip-unneeded par

# Install all the needed stuff to the package dir
mkdir -p $PKG/usr/{bin,man/man1}
install -m755 par $PKG/usr/bin/par
cat par.1 | gzip -9c > $PKG/usr/man/man1/par.1.gz

# Add documentation:
mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
cp -a $DOCS $PKG/usr/doc/$PRGNAM-$VERSION
cp -a $SRCDIR/$(basename $0) $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
chown -R root:root $PKG/usr/doc/$PRGNAM-$VERSION
find $PKG/usr/doc -type f -exec chmod 644 {} \;

# Add a package description:
mkdir -p $PKG/install
cat $SRCDIR/slack-desc > $PKG/install/slack-desc

# Build the package:
cd $PKG
makepkg --linkadd y --chown n $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.tgz 2>&1 | tee $OUTPUT/makepkg-${PRGNAM}.log
cd $OUTPUT
md5sum ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.tgz > ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.tgz.md5
cd -
cat $PKG/install/slack-desc | grep "^${PRGNAM}" > $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.txt