Initial revision

6 files changed, 531 insertions, 0 deletions

diff --git a/vcvrack-modularfungi/build/slack-desc b/vcvrack-modularfungi/build/slack-desc
new file mode 100644
index 00000000..b29ae062
--- /dev/null
+++ b/vcvrack-modularfungi/build/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+                    |-----handy-ruler------------------------------------------------------|
+vcvrack-modularfungi: vcvrack-modularfungi (ModularFungi VCV Rack Modules)
+vcvrack-modularfungi:
+vcvrack-modularfungi: ModularFungi is a collection of simple but useful modules
+vcvrack-modularfungi: for VCV Rack.
+vcvrack-modularfungi: It contains some Blanking plates in various sizes,
+vcvrack-modularfungi: an oscilloscope and a lights-off module.
+vcvrack-modularfungi:
+vcvrack-modularfungi:
+vcvrack-modularfungi:
+vcvrack-modularfungi: See also: https://github.com/david-c14/ModularFungi
+vcvrack-modularfungi:
diff --git a/vcvrack-modularfungi/build/slack-required b/vcvrack-modularfungi/build/slack-required
new file mode 100644
index 00000000..8cb01ae9
--- /dev/null
+++ b/vcvrack-modularfungi/build/slack-required
@@ -0,0 +1 @@
+vcvrack
diff --git a/vcvrack-modularfungi/build/vcvrack-modularfungi.SlackBuild b/vcvrack-modularfungi/build/vcvrack-modularfungi.SlackBuild
new file mode 100755
index 00000000..e8c17251
--- /dev/null
+++ b/vcvrack-modularfungi/build/vcvrack-modularfungi.SlackBuild
@@ -0,0 +1,245 @@
+#!/bin/sh
+# $Id$
+# Copyright 2021  Eric Hameleers, Eindhoven, NL
+# All rights reserved.
+#
+#   Permission to use, copy, modify, and distribute this software for
+#   any purpose with or without fee is hereby granted, provided that
+#   the above copyright notice and this permission notice appear in all
+#   copies.
+#
+#   THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
+#   WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#   MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+#   IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
+#   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+#   USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+#   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+#   OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+#   OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+#   SUCH DAMAGE.
+# -----------------------------------------------------------------------------
+#
+# Slackware SlackBuild script 
+# ===========================
+# By:          Eric Hameleers <alien@slackware.com>
+# For:         vcvrack-modularfungi
+# Descr:       ModularFungi modules for VCV Rack
+# URL:         https://github.com/david-c14/ModularFungi
+# Build needs: 
+# Needs:       vcvrack
+# Changelog:   
+# 1.1.4-1:     02/sep/2021 by Eric Hameleers <alien@slackware.com>
+#              * Initial build.
+# 
+# Run 'sh vcvrack-modularfungi.SlackBuild' to build a Slackware package.
+# The package (.t?z) and .txt file as well as build logs are created in /tmp .
+# Install the package using 'installpkg' or 'upgradepkg --install-new'.
+#
+# -----------------------------------------------------------------------------
+
+PRGNAM=vcvrack-modularfungi
+SRCNAM=ModularFungi
+VERSION=${VERSION:-1.1.4}
+BUILD=${BUILD:-1}
+NUMJOBS=${NUMJOBS:-" -j$(nproc) "}
+TAG=${TAG:-alien}
+
+DOCS="CHANGELOG.md LICENSE* README.md"
+
+# Where do we look for sources?
+SRCDIR=$(cd $(dirname $0); pwd)
+
+# Place to build (TMP) package (PKG) and output (OUTPUT) the program:
+TMP=${TMP:-/tmp/build}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+SOURCE="$SRCDIR/${SRCNAM}-${VERSION}.tar.gz"
+SRCURL="https://github.com/david-c14/${SRCNAM}/archive/refs/tags/v${VERSION}.tar.gz"
+## Or we retrieve the plugin plus internal deps from git:
+#GITURI="https://github.com/david-c14/ModularFungi.git"
+#BRANCH="master"
+
+# Use the src_checkout() function if no downloadable tarball exists.
+# Check out sources from SVN/GIT and create a tarball of them.
+# Examples for GIT and SVN repositories are given below:
+src_checkout() {
+  # Param #1 : index in the SOURCE[] array.
+  # Param #2 : full path to where SOURCE[$1] tarball should be created.
+  # Determine the tarball extension:
+  PEXT=$(echo "${2}" | sed -r -e 's/.*[^.].(tar.xz|tar.gz|tar.bz2|tgz).*/\1/')
+  case "$PEXT" in
+    "tar.xz") TARCOMP="J" ;;
+    "tar.gz") TARCOMP="z" ;;
+    "tgz") TARCOMP="z" ;;
+    "tar.bz2") TARCOMP="j" ;;
+    *) echo "Archive can only have extension 'tar.xz', '.tar.gz' '.tar.bz2' or '.tgz'" ; exit 1 ;;
+  esac
+  # Determine the directory name to create for the archive root:
+  PBASE=$(basename ${2} .${PEXT})
+  # Determine the directory where we create our checkout:
+  CODIR=$(dirname ${2})
+  case ${1} in
+  0) RETDIR=$(pwd)
+     mkdir -p $CODIR/${PRGNAM}_temp_checkout_$$ \
+       && cd $CODIR/${PRGNAM}_temp_checkout_$$
+     mkdir ${PBASE} \
+       && cd ${PBASE}
+     echo "Checking out '$GITURI':"
+     git clone ${GITURI} . \
+       && git checkout $BRANCH \
+       && chown -R root:root . \
+       && cd .. \
+       && tar --exclude .git -${TARCOMP}cf ${2} ${PBASE}
+     cd $RETDIR
+     rm -rf $CODIR/${PRGNAM}_temp_checkout_$$ || true
+     ;;
+  *) # Do nothing
+     ;;
+  esac
+}
+
+##
+## --- with a little luck, you won't have to edit below this point --- ##
+##
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i586 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+# Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
+case "$ARCH" in
+  i?86)      SLKCFLAGS="-O2 -march=${ARCH} -mtune=i686"
+             SLKLDFLAGS=""; LIBDIRSUFFIX=""
+             ;;
+  x86_64)    SLKCFLAGS="-O2 -fPIC"
+             SLKLDFLAGS="-L/usr/lib64"; LIBDIRSUFFIX="64"
+             ;;
+  armv7hl)   SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+             SLKLDFLAGS=""; LIBDIRSUFFIX=""
+             ;;
+  *)         SLKCFLAGS=${SLKCFLAGS:-"-O2"}
+             SLKLDFLAGS=${SLKLDFLAGS:-""}; LIBDIRSUFFIX=${LIBDIRSUFFIX:-""}
+             ;;
+esac
+
+case "$ARCH" in
+    arm*)    TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)       TARGET=$ARCH-slackware-linux ;;
+esac
+
+# Exit the script on errors:
+set -e
+trap 'echo "$0 FAILED at line ${LINENO}" | tee $OUTPUT/error-${PRGNAM}.log' ERR
+# Catch unitialized variables:
+set -u
+P1=${1:-1}
+
+# Save old umask and set to 0022:
+_UMASK_=$(umask)
+umask 0022
+
+# Create working directories:
+mkdir -p $OUTPUT          # place for the package to be saved
+mkdir -p $TMP/tmp-$PRGNAM # location to build the source
+mkdir -p $PKG             # place for the package to be built
+rm -rf $PKG/*             # always erase old package's contents
+rm -rf $TMP/tmp-$PRGNAM/* # remove the remnants of previous build
+rm -rf $OUTPUT/{checkout,configure,make,install,error,makepkg,patch}-$PRGNAM.log
+                          # remove old log files
+
+# Source file availability:
+if ! [ -f ${SOURCE} ]; then
+  echo "Source '$(basename ${SOURCE})' not available yet..."
+  # Check if the $SRCDIR is writable at all - if not, download to $OUTPUT
+  [ -w "$SRCDIR" ] || SOURCE="$OUTPUT/$(basename ${SOURCE})"
+  if [ -f ${SOURCE} ]; then echo "Ah, found it!"; continue; fi
+  if ! [ "x${SRCURL}" == "x" ]; then
+    echo "Will download file to $(dirname $SOURCE)"
+    wget --no-check-certificate -nv -T 20 -O "${SOURCE}" "${SRCURL}" || true
+    if [ $? -ne 0 -o ! -s "${SOURCE}" ]; then
+      echo "Fail to download '$(basename ${SOURCE})'. Aborting the build."
+      mv -f "${SOURCE}" "${SOURCE}".FAIL
+      exit 1
+    fi
+  else
+    # Try if we have a SVN/CVS download routine for ${SOURCE}
+    echo "Will checkout sources to $(dirname $SOURCE)"
+    src_checkout 0 "${SOURCE}" 2>&1 > $OUTPUT/checkout-$(basename ${SOURCE}).log
+  fi
+  if [ ! -f "${SOURCE}" -o ! -s "${SOURCE}" ]; then
+    echo "File '$(basename ${SOURCE})' not available. Aborting the build."
+    exit 1
+  fi
+fi
+
+if [ "$P1" == "--download" ]; then
+  echo "Download complete."
+  exit 0
+fi
+
+# --- PACKAGE BUILDING ---
+
+echo "++"
+echo "|| $PRGNAM-$VERSION"
+echo "++"
+
+cd $TMP/tmp-$PRGNAM
+echo "Extracting the source archive(s) for $PRGNAM..."
+tar -xvf ${SOURCE}
+cd ${SRCNAM}-${VERSION}
+chown -R root:root .
+chmod -R u+w,go+r-w,a+rX-st .
+
+echo Building ...
+export LDFLAGS="$SLKLDFLAGS"
+export CXXFLAGS="$SLKCFLAGS"
+export CFLAGS="$SLKCFLAGS"
+export RACK_DIR=/usr/share/vcvrack
+export FLAGS="-I/usr/include/vcvrack -I/usr/include/vcvrack/dep"
+make $NUMJOBS USE_SYSTEM_LIBS=true \
+  2>&1 | tee $OUTPUT/make-${PRGNAM}.log
+# Create the .zip file:
+USE_SYSTEM_LIBS=true make dist $NUMJOBS USE_SYSTEM_LIBS=true \
+  2>&1 | tee -a $OUTPUT/make-${PRGNAM}.log
+# Install the .zip file:
+install -D -m 0644 dist/${SRCNAM}*.zip \
+  $PKG/usr/share/vcvrack/${SRCNAM}.zip
+
+# Add documentation:
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a $DOCS $PKG/usr/doc/$PRGNAM-$VERSION || true
+cat $SRCDIR/$(basename $0) > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+chown -R root:root $PKG/usr/doc/$PRGNAM-$VERSION
+find $PKG/usr/doc -type f -exec chmod 644 {} \;
+
+# Strip binaries (if any):
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+# Add a package description:
+mkdir -p $PKG/install
+cat $SRCDIR/slack-desc > $PKG/install/slack-desc
+cat $SRCDIR/slack-required > $PKG/install/slack-required
+
+# Build the package:
+cd $PKG
+makepkg --linkadd y --chown n $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.${PKGTYPE:-txz} 2>&1 | tee $OUTPUT/makepkg-${PRGNAM}.log
+cd $OUTPUT
+md5sum ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.${PKGTYPE:-txz} > ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.${PKGTYPE:-txz}.md5
+cd -
+cat $PKG/install/slack-desc | grep "^${PRGNAM}" > $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.txt
+cat $PKG/install/slack-required > $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.dep
+
+# Restore the original umask:
+umask ${_UMASK_}
+
diff --git a/vcvrack-studiosixplusone/build/slack-desc b/vcvrack-studiosixplusone/build/slack-desc
new file mode 100644
index 00000000..437db7ac
--- /dev/null
+++ b/vcvrack-studiosixplusone/build/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+                        |-----handy-ruler------------------------------------------------------|
+vcvrack-studiosixplusone: vcvrack-studiosixplusone (StudioSixPlusOne VCV Rack Modules)
+vcvrack-studiosixplusone:
+vcvrack-studiosixplusone: StudioSixPlusOne is a collection of modules for VCV Rack.
+vcvrack-studiosixplusone:
+vcvrack-studiosixplusone:
+vcvrack-studiosixplusone:
+vcvrack-studiosixplusone:
+vcvrack-studiosixplusone:
+vcvrack-studiosixplusone:
+vcvrack-studiosixplusone: See also: https://github.com/StudioSixPlusOne/rack-modules
+vcvrack-studiosixplusone:
diff --git a/vcvrack-studiosixplusone/build/slack-required b/vcvrack-studiosixplusone/build/slack-required
new file mode 100644
index 00000000..8cb01ae9
--- /dev/null
+++ b/vcvrack-studiosixplusone/build/slack-required
@@ -0,0 +1 @@
+vcvrack
diff --git a/vcvrack-studiosixplusone/build/vcvrack-studiosixplusone.SlackBuild b/vcvrack-studiosixplusone/build/vcvrack-studiosixplusone.SlackBuild
new file mode 100755
index 00000000..fd6f067c
--- /dev/null
+++ b/vcvrack-studiosixplusone/build/vcvrack-studiosixplusone.SlackBuild
@@ -0,0 +1,246 @@
+#!/bin/sh
+# $Id$
+# Copyright 2021  Eric Hameleers, Eindhoven, NL
+# All rights reserved.
+#
+#   Permission to use, copy, modify, and distribute this software for
+#   any purpose with or without fee is hereby granted, provided that
+#   the above copyright notice and this permission notice appear in all
+#   copies.
+#
+#   THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
+#   WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#   MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+#   IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
+#   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+#   USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+#   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+#   OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+#   OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+#   SUCH DAMAGE.
+# -----------------------------------------------------------------------------
+#
+# Slackware SlackBuild script 
+# ===========================
+# By:          Eric Hameleers <alien@slackware.com>
+# For:         vcvrack-studiosixplusone
+# Descr:       StudioSixPlusOne modules for VCV Rack
+# URL:         https://github.com/StudioSixPlusOne/rack-modules
+# Build needs: 
+# Needs:       vcvrack
+# Changelog:   
+# 1.4-1:       02/sep/2021 by Eric Hameleers <alien@slackware.com>
+#              * Initial build.
+# 
+# Run 'sh vcvrack-studiosixplusone.SlackBuild' to build a Slackware package.
+# The package (.t?z) and .txt file as well as build logs are created in /tmp .
+# Install the package using 'installpkg' or 'upgradepkg --install-new'.
+#
+# -----------------------------------------------------------------------------
+
+PRGNAM=vcvrack-studiosixplusone
+MODNAM=StudioSixPlusOne
+SRCNAM=rack-modules
+VERSION=${VERSION:-1.4}
+BUILD=${BUILD:-1}
+NUMJOBS=${NUMJOBS:-" -j$(nproc) "}
+TAG=${TAG:-alien}
+
+DOCS="CHANGELOG.md LICENSE* README.md"
+
+# Where do we look for sources?
+SRCDIR=$(cd $(dirname $0); pwd)
+
+# Place to build (TMP) package (PKG) and output (OUTPUT) the program:
+TMP=${TMP:-/tmp/build}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+SOURCE="$SRCDIR/${MODNAM}-${VERSION}.tar.gz"
+SRCURL="https://github.com/${MODNAM}/${SRCNAM}/archive/refs/tags/V${VERSION}.tar.gz"
+## Or we retrieve the plugin plus internal deps from git:
+#GITURI="https://github.com/StudioSixPlusOne/rack-modules.git"
+#BRANCH="master"
+
+# Use the src_checkout() function if no downloadable tarball exists.
+# Check out sources from SVN/GIT and create a tarball of them.
+# Examples for GIT and SVN repositories are given below:
+src_checkout() {
+  # Param #1 : index in the SOURCE[] array.
+  # Param #2 : full path to where SOURCE[$1] tarball should be created.
+  # Determine the tarball extension:
+  PEXT=$(echo "${2}" | sed -r -e 's/.*[^.].(tar.xz|tar.gz|tar.bz2|tgz).*/\1/')
+  case "$PEXT" in
+    "tar.xz") TARCOMP="J" ;;
+    "tar.gz") TARCOMP="z" ;;
+    "tgz") TARCOMP="z" ;;
+    "tar.bz2") TARCOMP="j" ;;
+    *) echo "Archive can only have extension 'tar.xz', '.tar.gz' '.tar.bz2' or '.tgz'" ; exit 1 ;;
+  esac
+  # Determine the directory name to create for the archive root:
+  PBASE=$(basename ${2} .${PEXT})
+  # Determine the directory where we create our checkout:
+  CODIR=$(dirname ${2})
+  case ${1} in
+  0) RETDIR=$(pwd)
+     mkdir -p $CODIR/${PRGNAM}_temp_checkout_$$ \
+       && cd $CODIR/${PRGNAM}_temp_checkout_$$
+     mkdir ${PBASE} \
+       && cd ${PBASE}
+     echo "Checking out '$GITURI':"
+     git clone ${GITURI} . \
+       && git checkout $BRANCH \
+       && chown -R root:root . \
+       && cd .. \
+       && tar --exclude .git -${TARCOMP}cf ${2} ${PBASE}
+     cd $RETDIR
+     rm -rf $CODIR/${PRGNAM}_temp_checkout_$$ || true
+     ;;
+  *) # Do nothing
+     ;;
+  esac
+}
+
+##
+## --- with a little luck, you won't have to edit below this point --- ##
+##
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i586 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+# Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
+case "$ARCH" in
+  i?86)      SLKCFLAGS="-O2 -march=${ARCH} -mtune=i686"
+             SLKLDFLAGS=""; LIBDIRSUFFIX=""
+             ;;
+  x86_64)    SLKCFLAGS="-O2 -fPIC"
+             SLKLDFLAGS="-L/usr/lib64"; LIBDIRSUFFIX="64"
+             ;;
+  armv7hl)   SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+             SLKLDFLAGS=""; LIBDIRSUFFIX=""
+             ;;
+  *)         SLKCFLAGS=${SLKCFLAGS:-"-O2"}
+             SLKLDFLAGS=${SLKLDFLAGS:-""}; LIBDIRSUFFIX=${LIBDIRSUFFIX:-""}
+             ;;
+esac
+
+case "$ARCH" in
+    arm*)    TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)       TARGET=$ARCH-slackware-linux ;;
+esac
+
+# Exit the script on errors:
+set -e
+trap 'echo "$0 FAILED at line ${LINENO}" | tee $OUTPUT/error-${PRGNAM}.log' ERR
+# Catch unitialized variables:
+set -u
+P1=${1:-1}
+
+# Save old umask and set to 0022:
+_UMASK_=$(umask)
+umask 0022
+
+# Create working directories:
+mkdir -p $OUTPUT          # place for the package to be saved
+mkdir -p $TMP/tmp-$PRGNAM # location to build the source
+mkdir -p $PKG             # place for the package to be built
+rm -rf $PKG/*             # always erase old package's contents
+rm -rf $TMP/tmp-$PRGNAM/* # remove the remnants of previous build
+rm -rf $OUTPUT/{checkout,configure,make,install,error,makepkg,patch}-$PRGNAM.log
+                          # remove old log files
+
+# Source file availability:
+if ! [ -f ${SOURCE} ]; then
+  echo "Source '$(basename ${SOURCE})' not available yet..."
+  # Check if the $SRCDIR is writable at all - if not, download to $OUTPUT
+  [ -w "$SRCDIR" ] || SOURCE="$OUTPUT/$(basename ${SOURCE})"
+  if [ -f ${SOURCE} ]; then echo "Ah, found it!"; continue; fi
+  if ! [ "x${SRCURL}" == "x" ]; then
+    echo "Will download file to $(dirname $SOURCE)"
+    wget --no-check-certificate -nv -T 20 -O "${SOURCE}" "${SRCURL}" || true
+    if [ $? -ne 0 -o ! -s "${SOURCE}" ]; then
+      echo "Fail to download '$(basename ${SOURCE})'. Aborting the build."
+      mv -f "${SOURCE}" "${SOURCE}".FAIL
+      exit 1
+    fi
+  else
+    # Try if we have a SVN/CVS download routine for ${SOURCE}
+    echo "Will checkout sources to $(dirname $SOURCE)"
+    src_checkout 0 "${SOURCE}" 2>&1 > $OUTPUT/checkout-$(basename ${SOURCE}).log
+  fi
+  if [ ! -f "${SOURCE}" -o ! -s "${SOURCE}" ]; then
+    echo "File '$(basename ${SOURCE})' not available. Aborting the build."
+    exit 1
+  fi
+fi
+
+if [ "$P1" == "--download" ]; then
+  echo "Download complete."
+  exit 0
+fi
+
+# --- PACKAGE BUILDING ---
+
+echo "++"
+echo "|| $PRGNAM-$VERSION"
+echo "++"
+
+cd $TMP/tmp-$PRGNAM
+echo "Extracting the source archive(s) for $PRGNAM..."
+tar -xvf ${SOURCE}
+cd ${SRCNAM}-${VERSION}
+chown -R root:root .
+chmod -R u+w,go+r-w,a+rX-st .
+
+echo Building ...
+export LDFLAGS="$SLKLDFLAGS"
+export CXXFLAGS="$SLKCFLAGS"
+export CFLAGS="$SLKCFLAGS"
+export RACK_DIR=/usr/share/vcvrack
+export FLAGS="-I/usr/include/vcvrack -I/usr/include/vcvrack/dep -I/usr/include/vcvrack/dsp"
+make $NUMJOBS USE_SYSTEM_LIBS=true \
+  2>&1 | tee $OUTPUT/make-${PRGNAM}.log
+# Create the .zip file:
+USE_SYSTEM_LIBS=true make dist $NUMJOBS USE_SYSTEM_LIBS=true \
+  2>&1 | tee -a $OUTPUT/make-${PRGNAM}.log
+# Install the .zip file:
+install -D -m 0644 dist/${MODNAM}*.zip \
+  $PKG/usr/share/vcvrack/${MODNAM}.zip
+
+# Add documentation:
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a $DOCS $PKG/usr/doc/$PRGNAM-$VERSION || true
+cat $SRCDIR/$(basename $0) > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+chown -R root:root $PKG/usr/doc/$PRGNAM-$VERSION
+find $PKG/usr/doc -type f -exec chmod 644 {} \;
+
+# Strip binaries (if any):
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+# Add a package description:
+mkdir -p $PKG/install
+cat $SRCDIR/slack-desc > $PKG/install/slack-desc
+cat $SRCDIR/slack-required > $PKG/install/slack-required
+
+# Build the package:
+cd $PKG
+makepkg --linkadd y --chown n $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.${PKGTYPE:-txz} 2>&1 | tee $OUTPUT/makepkg-${PRGNAM}.log
+cd $OUTPUT
+md5sum ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.${PKGTYPE:-txz} > ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.${PKGTYPE:-txz}.md5
+cd -
+cat $PKG/install/slack-desc | grep "^${PRGNAM}" > $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.txt
+cat $PKG/install/slack-required > $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.dep
+
+# Restore the original umask:
+umask ${_UMASK_}
+