Update to Alien's ARM which allows XFCE to run on an ARM ChromeBook.

This large update brings Alien's ARM repository almost to the same level
of package versions in slackware-current. THese updates were needed to
make it possible to start a functional XFCE session on Samsung's ARM
ChromeBook (XE303C12).

76 files changed, 4678 insertions, 0 deletions

diff --git a/source.local/xfce/Thunar/Thunar.SlackBuild b/source.local/xfce/Thunar/Thunar.SlackBuild
new file mode 100755
index 0000000..07f6307
--- /dev/null
+++ b/source.local/xfce/Thunar/Thunar.SlackBuild
@@ -0,0 +1,146 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=Thunar
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ -e $CWD/machine.conf ]; then
+  . $CWD/machine.conf ]
+elif [ -e /etc/slackbuild/machine.conf ]; then
+  . /etc/slackbuild/machine.conf ]
+else
+  # Automatically determine the architecture we're building on:
+  if [ -z "$ARCH" ]; then
+    case "$( uname -m )" in
+      i?86) export ARCH=i486 ;;
+      arm*) export ARCH=arm ;;
+      # Unless $ARCH is already set, use uname -m for all other archs:
+         *) export ARCH=$( uname -m ) ;;
+    esac
+  fi
+  # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
+  if [ "$ARCH" = "i486" ]; then
+    SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "s390" ]; then
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "x86_64" ]; then
+    SLKCFLAGS="-O2 -fPIC"
+    LIBDIRSUFFIX="64"
+  else
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  fi
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+find . -exec touch {} \;
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-debug \
+  --build=$TARGET || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source.local/xfce/Thunar/slack-desc b/source.local/xfce/Thunar/slack-desc
new file mode 100644
index 0000000..afd93c0
--- /dev/null
+++ b/source.local/xfce/Thunar/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+Thunar: Thunar (file manager)
+Thunar:
+Thunar: Thunar is a modern file manager for the Xfce Desktop Environment.
+Thunar: Thunar has been designed from the ground up to be fast and
+Thunar: easy-to-use.  Its user interface is clean and intuitive, and does not
+Thunar: include any confusing or useless options.  Thunar is fast and
+Thunar: responsive with a good start up time and directory load time.
+Thunar:
+Thunar: Homepage:  http://thunar.xfce.org
+Thunar:
+Thunar:
diff --git a/source.local/xfce/XFCE.SlackBuild b/source.local/xfce/XFCE.SlackBuild
new file mode 120000
index 0000000..84ce919
--- /dev/null
+++ b/source.local/xfce/XFCE.SlackBuild
@@ -0,0 +1 @@
+xfce-build-all.sh
\ No newline at end of file
diff --git a/source.local/xfce/exo/exo.SlackBuild b/source.local/xfce/exo/exo.SlackBuild
new file mode 100755
index 0000000..66f26c4
--- /dev/null
+++ b/source.local/xfce/exo/exo.SlackBuild
@@ -0,0 +1,147 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=exo
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ -e $CWD/machine.conf ]; then
+  . $CWD/machine.conf ]
+elif [ -e /etc/slackbuild/machine.conf ]; then
+  . /etc/slackbuild/machine.conf ]
+else
+  # Automatically determine the architecture we're building on:
+  if [ -z "$ARCH" ]; then
+    case "$( uname -m )" in
+      i?86) export ARCH=i486 ;;
+      arm*) export ARCH=arm ;;
+      # Unless $ARCH is already set, use uname -m for all other archs:
+         *) export ARCH=$( uname -m ) ;;
+    esac
+  fi
+  # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
+  if [ "$ARCH" = "i486" ]; then
+    SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "s390" ]; then
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "x86_64" ]; then
+    SLKCFLAGS="-O2 -fPIC"
+    LIBDIRSUFFIX="64"
+  else
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  fi
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+find . -exec touch {} \;
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-debug \
+  --build=$TARGET || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source.local/xfce/exo/slack-desc b/source.local/xfce/exo/slack-desc
new file mode 100644
index 0000000..6bd9c82
--- /dev/null
+++ b/source.local/xfce/exo/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+   |-----handy-ruler------------------------------------------------------|
+exo: exo (libexo extension library)
+exo:
+exo: This is libexo, an extension library to Xfce, developed by
+exo: os-cillation.  While Xfce comes with quite a few libraries that are
+exo: targeted at desktop development, libexo is targeted at application
+exo: development.  It also has some helper applications that are used
+exo: throughout the entire desktop.
+exo:
+exo: 
+exo:
+exo:
diff --git a/source.local/xfce/garcon/garcon.SlackBuild b/source.local/xfce/garcon/garcon.SlackBuild
new file mode 100755
index 0000000..9f161a8
--- /dev/null
+++ b/source.local/xfce/garcon/garcon.SlackBuild
@@ -0,0 +1,145 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=garcon
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ -e $CWD/machine.conf ]; then
+  . $CWD/machine.conf ]
+elif [ -e /etc/slackbuild/machine.conf ]; then
+  . /etc/slackbuild/machine.conf ]
+else
+  # Automatically determine the architecture we're building on:
+  if [ -z "$ARCH" ]; then
+    case "$( uname -m )" in
+      i?86) export ARCH=i486 ;;
+      arm*) export ARCH=arm ;;
+      # Unless $ARCH is already set, use uname -m for all other archs:
+         *) export ARCH=$( uname -m ) ;;
+    esac
+  fi
+  # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
+  if [ "$ARCH" = "i486" ]; then
+    SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "s390" ]; then
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "x86_64" ]; then
+    SLKCFLAGS="-O2 -fPIC"
+    LIBDIRSUFFIX="64"
+  else
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  fi
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-debug \
+  --build=$TARGET || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source.local/xfce/garcon/slack-desc b/source.local/xfce/garcon/slack-desc
new file mode 100644
index 0000000..abc2d78
--- /dev/null
+++ b/source.local/xfce/garcon/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+garcon: garcon (menu implementation for Xfce)
+garcon:
+garcon: This is garcon, a freedesktop.org compliant menu implementation based
+garcon: on GLib and GIO.  It was started as a rewrite of the former Xfce menu
+garcon: library called libxfce4menu.
+garcon:
+garcon:
+garcon:
+garcon:
+garcon:
+garcon:
diff --git a/source.local/xfce/gtk-xfce-engine/gtk-xfce-engine.SlackBuild b/source.local/xfce/gtk-xfce-engine/gtk-xfce-engine.SlackBuild
new file mode 100755
index 0000000..5c70718
--- /dev/null
+++ b/source.local/xfce/gtk-xfce-engine/gtk-xfce-engine.SlackBuild
@@ -0,0 +1,145 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=gtk-xfce-engine
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ -e $CWD/machine.conf ]; then
+  . $CWD/machine.conf ]
+elif [ -e /etc/slackbuild/machine.conf ]; then
+  . /etc/slackbuild/machine.conf ]
+else
+  # Automatically determine the architecture we're building on:
+  if [ -z "$ARCH" ]; then
+    case "$( uname -m )" in
+      i?86) export ARCH=i486 ;;
+      arm*) export ARCH=arm ;;
+      # Unless $ARCH is already set, use uname -m for all other archs:
+         *) export ARCH=$( uname -m ) ;;
+    esac
+  fi
+  # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
+  if [ "$ARCH" = "i486" ]; then
+    SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "s390" ]; then
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "x86_64" ]; then
+    SLKCFLAGS="-O2 -fPIC"
+    LIBDIRSUFFIX="64"
+  else
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  fi
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-debug \
+  --build=$TARGET || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source.local/xfce/gtk-xfce-engine/slack-desc b/source.local/xfce/gtk-xfce-engine/slack-desc
new file mode 100644
index 0000000..1ccfa12
--- /dev/null
+++ b/source.local/xfce/gtk-xfce-engine/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+gtk-xfce-engine: gtk-xfce-engine (Xfce Gtk+ engines)
+gtk-xfce-engine:
+gtk-xfce-engine: The GTK-Xfce-Engine package contains several GTK+-2/3 themes and the
+gtk-xfce-engine: applications and libraries needed to display them.  This is useful for
+gtk-xfce-engine: customizing the appearance of your Xfce desktop.
+gtk-xfce-engine:
+gtk-xfce-engine:
+gtk-xfce-engine:
+gtk-xfce-engine:
+gtk-xfce-engine:
+gtk-xfce-engine:
diff --git a/source.local/xfce/libxfce4ui/libxfce4ui.SlackBuild b/source.local/xfce/libxfce4ui/libxfce4ui.SlackBuild
new file mode 100755
index 0000000..4c1c93f
--- /dev/null
+++ b/source.local/xfce/libxfce4ui/libxfce4ui.SlackBuild
@@ -0,0 +1,150 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=libxfce4ui
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ -e $CWD/machine.conf ]; then
+  . $CWD/machine.conf ]
+elif [ -e /etc/slackbuild/machine.conf ]; then
+  . /etc/slackbuild/machine.conf ]
+else
+  # Automatically determine the architecture we're building on:
+  if [ -z "$ARCH" ]; then
+    case "$( uname -m )" in
+      i?86) export ARCH=i486 ;;
+      arm*) export ARCH=arm ;;
+      # Unless $ARCH is already set, use uname -m for all other archs:
+         *) export ARCH=$( uname -m ) ;;
+    esac
+  fi
+  # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
+  if [ "$ARCH" = "i486" ]; then
+    SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "s390" ]; then
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "x86_64" ]; then
+    SLKCFLAGS="-O2 -fPIC"
+    LIBDIRSUFFIX="64"
+  else
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  fi
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --with-vendor-info=Slackware \
+  --disable-static \
+  --disable-debug \
+  --build=$TARGET || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Add vendor info in /usr/share/xfce4/Slackware
+mkdir -p $PKG/usr/share/xfce4
+echo "http://slackware.com/" > $PKG/usr/share/xfce4/Slackware
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source.local/xfce/libxfce4ui/slack-desc b/source.local/xfce/libxfce4ui/slack-desc
new file mode 100644
index 0000000..d774e67
--- /dev/null
+++ b/source.local/xfce/libxfce4ui/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+          |-----handy-ruler------------------------------------------------------|
+libxfce4ui: libxfce4ui (Xfce widget library)
+libxfce4ui:
+libxfce4ui: This is libxfce4ui, the replacement of the old libxfcegui4 library.
+libxfce4ui: It is used to share commonly used Xfce widgets among the Xfce
+libxfce4ui: applications.
+libxfce4ui:
+libxfce4ui:
+libxfce4ui:
+libxfce4ui:
+libxfce4ui:
+libxfce4ui:
diff --git a/source.local/xfce/libxfce4util/libxfce4util.SlackBuild b/source.local/xfce/libxfce4util/libxfce4util.SlackBuild
new file mode 100755
index 0000000..d74d4e1
--- /dev/null
+++ b/source.local/xfce/libxfce4util/libxfce4util.SlackBuild
@@ -0,0 +1,145 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=libxfce4util
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ -e $CWD/machine.conf ]; then
+  . $CWD/machine.conf ]
+elif [ -e /etc/slackbuild/machine.conf ]; then
+  . /etc/slackbuild/machine.conf ]
+else
+  # Automatically determine the architecture we're building on:
+  if [ -z "$ARCH" ]; then
+    case "$( uname -m )" in
+      i?86) export ARCH=i486 ;;
+      arm*) export ARCH=arm ;;
+      # Unless $ARCH is already set, use uname -m for all other archs:
+         *) export ARCH=$( uname -m ) ;;
+    esac
+  fi
+  # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
+  if [ "$ARCH" = "i486" ]; then
+    SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "s390" ]; then
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "x86_64" ]; then
+    SLKCFLAGS="-O2 -fPIC"
+    LIBDIRSUFFIX="64"
+  else
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  fi
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-debug \
+  --build=$TARGET || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source.local/xfce/libxfce4util/slack-desc b/source.local/xfce/libxfce4util/slack-desc
new file mode 100644
index 0000000..b5c9259
--- /dev/null
+++ b/source.local/xfce/libxfce4util/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+            |-----handy-ruler------------------------------------------------------|
+libxfce4util: libxfce4util (basic utility library for Xfce)
+libxfce4util:
+libxfce4util: Basic utility library for Xfce.  This provides useful functions not
+libxfce4util: relating to the handling of the user interface.
+libxfce4util: 
+libxfce4util:
+libxfce4util:
+libxfce4util:
+libxfce4util:
+libxfce4util:
+libxfce4util:
diff --git a/source.local/xfce/libxfcegui4/libxfcegui4.SlackBuild b/source.local/xfce/libxfcegui4/libxfcegui4.SlackBuild
new file mode 100755
index 0000000..1c36591
--- /dev/null
+++ b/source.local/xfce/libxfcegui4/libxfcegui4.SlackBuild
@@ -0,0 +1,145 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=libxfcegui4
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ -e $CWD/machine.conf ]; then
+  . $CWD/machine.conf ]
+elif [ -e /etc/slackbuild/machine.conf ]; then
+  . /etc/slackbuild/machine.conf ]
+else
+  # Automatically determine the architecture we're building on:
+  if [ -z "$ARCH" ]; then
+    case "$( uname -m )" in
+      i?86) export ARCH=i486 ;;
+      arm*) export ARCH=arm ;;
+      # Unless $ARCH is already set, use uname -m for all other archs:
+         *) export ARCH=$( uname -m ) ;;
+    esac
+  fi
+  # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
+  if [ "$ARCH" = "i486" ]; then
+    SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "s390" ]; then
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "x86_64" ]; then
+    SLKCFLAGS="-O2 -fPIC"
+    LIBDIRSUFFIX="64"
+  else
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  fi
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-debug \
+  --build=$TARGET || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source.local/xfce/libxfcegui4/slack-desc b/source.local/xfce/libxfcegui4/slack-desc
new file mode 100644
index 0000000..8309460
--- /dev/null
+++ b/source.local/xfce/libxfcegui4/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+           |-----handy-ruler------------------------------------------------------|
+libxfcegui4: libxfcegui4 (old Xfce widget library)
+libxfcegui4:
+libxfcegui4: This is a widget library for Xfce.  It has been replaced by the use
+libxfcegui4: of the libxfce4ui library, but older programs might still need it.
+libxfcegui4:
+libxfcegui4:
+libxfcegui4:
+libxfcegui4:
+libxfcegui4:
+libxfcegui4:
+libxfcegui4:
diff --git a/source.local/xfce/orage/orage.SlackBuild b/source.local/xfce/orage/orage.SlackBuild
new file mode 100755
index 0000000..a2c1ba1
--- /dev/null
+++ b/source.local/xfce/orage/orage.SlackBuild
@@ -0,0 +1,135 @@
+#!/bin/sh
+
+# Slackware build script for orage
+
+# Copyright 2010,2011,2012  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=orage
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+if [ -e $CWD/machine.conf ]; then
+  . $CWD/machine.conf ]
+elif [ -e /etc/slackbuild/machine.conf ]; then
+  . /etc/slackbuild/machine.conf ]
+else
+  # Automatically determine the architecture we're building on:
+  if [ -z "$ARCH" ]; then
+    case "$( uname -m )" in
+      i?86) export ARCH=i486 ;;
+      arm*) export ARCH=arm ;;
+      # Unless $ARCH is already set, use uname -m for all other archs:
+         *) export ARCH=$( uname -m ) ;;
+    esac
+  fi
+  # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
+  if [ "$ARCH" = "i486" ]; then
+    SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "s390" ]; then
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "x86_64" ]; then
+    SLKCFLAGS="-O2 -fPIC"
+    LIBDIRSUFFIX="64"
+  else
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  fi
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+# Yes, libical's pkgconfig file is incomplete, it seems
+CFLAGS="$SLKCFLAGS -I/usr/include/libical" \
+CXXFLAGS="$SLKCFLAGS -I/usr/include/libical" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-debug \
+  --build=$TARGET || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* INSTALL NEWS README* TODO \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source.local/xfce/orage/slack-desc b/source.local/xfce/orage/slack-desc
new file mode 100644
index 0000000..665765d
--- /dev/null
+++ b/source.local/xfce/orage/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+     |-----handy-ruler------------------------------------------------------|
+orage: orage (Xfce's calendar)
+orage:
+orage: Orage is a time-managing application for the Xfce desktop environment.
+orage:
+orage:
+orage:
+orage:
+orage:
+orage:
+orage:
+orage:
diff --git a/source.local/xfce/thunar-volman/slack-desc b/source.local/xfce/thunar-volman/slack-desc
new file mode 100644
index 0000000..900d22a
--- /dev/null
+++ b/source.local/xfce/thunar-volman/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+             |-----handy-ruler------------------------------------------------|
+thunar-volman: thunar-volman (Thunar Volume Manager Plugin)
+thunar-volman: 
+thunar-volman: thunar-volman is an extension for the Thunar File Manager, 
+thunar-volman: which enables automatic management of removable drives and 
+thunar-volman: media. 
+thunar-volman: 
+thunar-volman: 
+thunar-volman: 
+thunar-volman: 
+thunar-volman: 
+thunar-volman: 
diff --git a/source.local/xfce/thunar-volman/thunar-volman.SlackBuild b/source.local/xfce/thunar-volman/thunar-volman.SlackBuild
new file mode 100755
index 0000000..06ad1f6
--- /dev/null
+++ b/source.local/xfce/thunar-volman/thunar-volman.SlackBuild
@@ -0,0 +1,116 @@
+#!/bin/sh
+
+# Slackware build script for thunar-volman
+
+# Copyright 2007-2012  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+PKGNAM=thunar-volman
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+if [ -e $CWD/machine.conf ]; then
+  . $CWD/machine.conf ]
+elif [ -e /etc/slackbuild/machine.conf ]; then
+  . /etc/slackbuild/machine.conf ]
+else
+  # Automatically determine the architecture we're building on:
+  if [ -z "$ARCH" ]; then
+    case "$( uname -m )" in
+      i?86) export ARCH=i486 ;;
+      arm*) export ARCH=arm ;;
+      # Unless $ARCH is already set, use uname -m for all other archs:
+         *) export ARCH=$( uname -m ) ;;
+    esac
+  fi
+  # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
+  if [ "$ARCH" = "i486" ]; then
+    SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "s390" ]; then
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "x86_64" ]; then
+    SLKCFLAGS="-O2 -fPIC"
+    LIBDIRSUFFIX="64"
+  else
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  fi
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --enable-debug=no \
+  --build=$TARGET || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* INSTALL NEWS README* THANKS \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source.local/xfce/tumbler/set-gststate-on-error.diff.gz b/source.local/xfce/tumbler/set-gststate-on-error.diff.gz
new file mode 100644
index 0000000..1955941
--- /dev/null
+++ b/source.local/xfce/tumbler/set-gststate-on-error.diff.gz
diff --git a/source.local/xfce/tumbler/slack-desc b/source.local/xfce/tumbler/slack-desc
new file mode 100644
index 0000000..d40670e
--- /dev/null
+++ b/source.local/xfce/tumbler/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+       |-----handy-ruler------------------------------------------------------|
+tumbler: tumbler (thumbnail generator)
+tumbler:
+tumbler: Tumbler is a D-Bus service for applications to request thumbnails
+tumbler: for various URI schemes and MIME types. It is written in an object-
+tumbler: oriented fashion using GLib and GObject.  It provides plugin
+tumbler: interfaces for extending the URI schemes and MIME types for which
+tumbler: thumbnails can be generated as well as for replacing the storage
+tumbler: backend that is used to store the thumbnails on disk. 
+tumbler:
+tumbler:
+tumbler:
diff --git a/source.local/xfce/tumbler/tumbler.SlackBuild b/source.local/xfce/tumbler/tumbler.SlackBuild
new file mode 100755
index 0000000..781a5af
--- /dev/null
+++ b/source.local/xfce/tumbler/tumbler.SlackBuild
@@ -0,0 +1,147 @@
+#!/bin/sh
+
+# Copyright 2012, 2013  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=tumbler
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-3}
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ -e $CWD/machine.conf ]; then
+  . $CWD/machine.conf ]
+elif [ -e /etc/slackbuild/machine.conf ]; then
+  . /etc/slackbuild/machine.conf ]
+else
+  # Automatically determine the architecture we're building on:
+  if [ -z "$ARCH" ]; then
+    case "$( uname -m )" in
+      i?86) export ARCH=i486 ;;
+      arm*) export ARCH=arm ;;
+      # Unless $ARCH is already set, use uname -m for all other archs:
+         *) export ARCH=$( uname -m ) ;;
+    esac
+  fi
+  # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
+  if [ "$ARCH" = "i486" ]; then
+    SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "s390" ]; then
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "x86_64" ]; then
+    SLKCFLAGS="-O2 -fPIC"
+    LIBDIRSUFFIX="64"
+  else
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  fi
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+zcat $CWD/set-gststate-on-error.diff.gz | patch -p1 --verbose || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-debug \
+  --build=$TARGET || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source.local/xfce/xfce-build-all.sh b/source.local/xfce/xfce-build-all.sh
new file mode 100755
index 0000000..dec432f
--- /dev/null
+++ b/source.local/xfce/xfce-build-all.sh
@@ -0,0 +1,73 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# Set to 1 if you'd like to install/upgrade package as they are built.
+# This is recommended.
+INST=1
+
+TMP=${TMP:-/tmp}
+
+for package in \
+  xfce4-dev-tools \
+  libxfce4util \
+  xfconf \
+  libxfce4ui \
+  libxfcegui4 \
+  exo \
+  garcon \
+  tumbler \
+  Thunar \
+  xfce4-panel \
+  Thunar \
+  xfce4-settings \
+  xfce4-session \
+  xfdesktop \
+  xfwm4 \
+  xfce4-appfinder \
+  gtk-xfce-engine \
+  xfwm4-themes \
+  xfce4-terminal \
+  orage \
+  xfce4-mixer \
+  thunar-volman \
+  xfce4-power-manager \
+  xfce4-notifyd \
+  xfce4-volumed \
+  xfce4-clipman-plugin \
+  xfce4-screenshooter \
+  xfce4-systemload-plugin \
+  xfce4-taskmanager \
+  xfce4-weather-plugin \
+  ; do
+  cd $package || exit 1
+  ./${package}.SlackBuild || ( touch /tmp/${package}.failed ; exit 1 ) || exit 1
+  if [ "$INST" = "1" ]; then
+    PACKAGE="$(ls -t $TMP/$(ls ${package}*.xz | rev | cut -f2- -d - | rev)-*txz | head -n 1)"
+    if [ -f $PACKAGE ]; then
+      upgradepkg --install-new --reinstall $PACKAGE
+    else
+      echo "Error:  package to upgrade "$PACKAGE" not found in $TMP"
+      exit 1
+    fi
+  fi
+  cd ..
+done
diff --git a/source.local/xfce/xfce4-appfinder/slack-desc b/source.local/xfce/xfce4-appfinder/slack-desc
new file mode 100644
index 0000000..ef06f70
--- /dev/null
+++ b/source.local/xfce/xfce4-appfinder/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+xfce4-appfinder: xfce4-appfinder (Application finder)
+xfce4-appfinder:
+xfce4-appfinder: The Xfce application finder is a tool to find and launch installed
+xfce4-appfinder: applications on your system and execute commands.  It can also be used
+xfce4-appfinder: to quickly add launchers to the Xfce Panel by dragging an item from
+xfce4-appfinder: the view and dropping it on the panel.
+xfce4-appfinder:
+xfce4-appfinder:
+xfce4-appfinder:
+xfce4-appfinder:
+xfce4-appfinder:
diff --git a/source.local/xfce/xfce4-appfinder/xfce4-appfinder.SlackBuild b/source.local/xfce/xfce4-appfinder/xfce4-appfinder.SlackBuild
new file mode 100755
index 0000000..9aca44b
--- /dev/null
+++ b/source.local/xfce/xfce4-appfinder/xfce4-appfinder.SlackBuild
@@ -0,0 +1,145 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=xfce4-appfinder
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ -e $CWD/machine.conf ]; then
+  . $CWD/machine.conf ]
+elif [ -e /etc/slackbuild/machine.conf ]; then
+  . /etc/slackbuild/machine.conf ]
+else
+  # Automatically determine the architecture we're building on:
+  if [ -z "$ARCH" ]; then
+    case "$( uname -m )" in
+      i?86) export ARCH=i486 ;;
+      arm*) export ARCH=arm ;;
+      # Unless $ARCH is already set, use uname -m for all other archs:
+         *) export ARCH=$( uname -m ) ;;
+    esac
+  fi
+  # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
+  if [ "$ARCH" = "i486" ]; then
+    SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "s390" ]; then
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "x86_64" ]; then
+    SLKCFLAGS="-O2 -fPIC"
+    LIBDIRSUFFIX="64"
+  else
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  fi
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-debug \
+  --build=$TARGET || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source.local/xfce/xfce4-clipman-plugin/doinst.sh.gz b/source.local/xfce/xfce4-clipman-plugin/doinst.sh.gz
new file mode 100644
index 0000000..453835c
--- /dev/null
+++ b/source.local/xfce/xfce4-clipman-plugin/doinst.sh.gz
diff --git a/source.local/xfce/xfce4-clipman-plugin/slack-desc b/source.local/xfce/xfce4-clipman-plugin/slack-desc
new file mode 100644
index 0000000..def9184
--- /dev/null
+++ b/source.local/xfce/xfce4-clipman-plugin/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+                    |-----handy-ruler------------------------------------------------------|
+xfce4-clipman-plugin: xfce4-clipman-plugin (clipman plugin for the Xfce panel)
+xfce4-clipman-plugin:
+xfce4-clipman-plugin: Clipman allows you to keep several clipboard selections in memory
+xfce4-clipman-plugin: which you can then use to toggle.  It can pull the clips from both
+xfce4-clipman-plugin: the selection and the copy buffer, restore your clipboard on login,
+xfce4-clipman-plugin: and prevent an empty clipboard.
+xfce4-clipman-plugin:
+xfce4-clipman-plugin:
+xfce4-clipman-plugin:
+xfce4-clipman-plugin:
+xfce4-clipman-plugin:
diff --git a/source.local/xfce/xfce4-clipman-plugin/xfce4-clipman-plugin.SlackBuild b/source.local/xfce/xfce4-clipman-plugin/xfce4-clipman-plugin.SlackBuild
new file mode 100755
index 0000000..7c89698
--- /dev/null
+++ b/source.local/xfce/xfce4-clipman-plugin/xfce4-clipman-plugin.SlackBuild
@@ -0,0 +1,120 @@
+#!/bin/sh
+
+# Slackware build script for xfce4-clipman-plugin
+
+# Copyright 2006-2012  Robby Workman  Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+#  Redistributions of this script must retain the above copyright
+#  notice, this list of conditions, and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=xfce4-clipman-plugin
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+if [ -e $CWD/machine.conf ]; then
+  . $CWD/machine.conf ]
+elif [ -e /etc/slackbuild/machine.conf ]; then
+  . /etc/slackbuild/machine.conf ]
+else
+  # Automatically determine the architecture we're building on:
+  if [ -z "$ARCH" ]; then
+    case "$( uname -m )" in
+      i?86) export ARCH=i486 ;;
+      arm*) export ARCH=arm ;;
+      # Unless $ARCH is already set, use uname -m for all other archs:
+         *) export ARCH=$( uname -m ) ;;
+    esac
+  fi
+  # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
+  if [ "$ARCH" = "i486" ]; then
+    SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "s390" ]; then
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "x86_64" ]; then
+    SLKCFLAGS="-O2 -fPIC"
+    LIBDIRSUFFIX="64"
+  else
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  fi
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --enable-shared=yes \
+  --enable-static=no \
+  --enable-debug=no \
+  --build=$TARGET || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* INSTALL NEWS README* \
+    $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source.local/xfce/xfce4-clipman-plugin/xfce4-clipman-plugin.url b/source.local/xfce/xfce4-clipman-plugin/xfce4-clipman-plugin.url
new file mode 100644
index 0000000..73b59ab
--- /dev/null
+++ b/source.local/xfce/xfce4-clipman-plugin/xfce4-clipman-plugin.url
@@ -0,0 +1 @@
+http://archive.xfce.org/src/panel-plugins/xfce4-clipman-plugin/
diff --git a/source.local/xfce/xfce4-dev-tools/slack-desc b/source.local/xfce/xfce4-dev-tools/slack-desc
new file mode 100644
index 0000000..a5d0a4d
--- /dev/null
+++ b/source.local/xfce/xfce4-dev-tools/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+xfce4-dev-tools: xfce4-dev-tools (Xfce development tools)
+xfce4-dev-tools:
+xfce4-dev-tools: The Xfce development tools are a collection of tools and macros for
+xfce4-dev-tools: Xfce developers and people that want to build Xfce from Git.
+xfce4-dev-tools:
+xfce4-dev-tools:
+xfce4-dev-tools:
+xfce4-dev-tools:
+xfce4-dev-tools:
+xfce4-dev-tools:
+xfce4-dev-tools:
diff --git a/source.local/xfce/xfce4-dev-tools/xfce4-dev-tools.SlackBuild b/source.local/xfce/xfce4-dev-tools/xfce4-dev-tools.SlackBuild
new file mode 100755
index 0000000..6d3e8bd
--- /dev/null
+++ b/source.local/xfce/xfce4-dev-tools/xfce4-dev-tools.SlackBuild
@@ -0,0 +1,145 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=xfce4-dev-tools
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ -e $CWD/machine.conf ]; then
+  . $CWD/machine.conf ]
+elif [ -e /etc/slackbuild/machine.conf ]; then
+  . /etc/slackbuild/machine.conf ]
+else
+  # Automatically determine the architecture we're building on:
+  if [ -z "$ARCH" ]; then
+    case "$( uname -m )" in
+      i?86) export ARCH=i486 ;;
+      arm*) export ARCH=arm ;;
+      # Unless $ARCH is already set, use uname -m for all other archs:
+         *) export ARCH=$( uname -m ) ;;
+    esac
+  fi
+  # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
+  if [ "$ARCH" = "i486" ]; then
+    SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "s390" ]; then
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "x86_64" ]; then
+    SLKCFLAGS="-O2 -fPIC"
+    LIBDIRSUFFIX="64"
+  else
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  fi
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-debug \
+  --build=$TARGET || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source.local/xfce/xfce4-mixer/doinst.sh.gz b/source.local/xfce/xfce4-mixer/doinst.sh.gz
new file mode 100644
index 0000000..58da219
--- /dev/null
+++ b/source.local/xfce/xfce4-mixer/doinst.sh.gz
diff --git a/source.local/xfce/xfce4-mixer/slack-desc b/source.local/xfce/xfce4-mixer/slack-desc
new file mode 100644
index 0000000..7274187
--- /dev/null
+++ b/source.local/xfce/xfce4-mixer/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+           |-----handy-ruler------------------------------------------------------|
+xfce4-mixer: xfce4-mixer (Sound mixer applet for Xfce)
+xfce4-mixer:
+xfce4-mixer: The xfce4-mixer package contains a volume control application based 
+xfce4-mixer: on GStreamer written to conceptually fit into the Xfce desktop 
+xfce4-mixer: environment.  It also contains a plugin for the Xfce panel which is 
+xfce4-mixer: especially designed for use with the mouse wheel.
+xfce4-mixer:
+xfce4-mixer:
+xfce4-mixer:
+xfce4-mixer:
+xfce4-mixer:
diff --git a/source.local/xfce/xfce4-mixer/xfce4-mixer.SlackBuild b/source.local/xfce/xfce4-mixer/xfce4-mixer.SlackBuild
new file mode 100755
index 0000000..05ae280
--- /dev/null
+++ b/source.local/xfce/xfce4-mixer/xfce4-mixer.SlackBuild
@@ -0,0 +1,120 @@
+#!/bin/sh
+
+# Slackware build script for xfce4-mixer
+
+# Copyright 2010, 2011  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=xfce4-mixer
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+if [ -e $CWD/machine.conf ]; then
+  . $CWD/machine.conf ]
+elif [ -e /etc/slackbuild/machine.conf ]; then
+  . /etc/slackbuild/machine.conf ]
+else
+  # Automatically determine the architecture we're building on:
+  if [ -z "$ARCH" ]; then
+    case "$( uname -m )" in
+      i?86) export ARCH=i486 ;;
+      arm*) export ARCH=arm ;;
+      # Unless $ARCH is already set, use uname -m for all other archs:
+         *) export ARCH=$( uname -m ) ;;
+    esac
+  fi
+  # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
+  if [ "$ARCH" = "i486" ]; then
+    SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "s390" ]; then
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "x86_64" ]; then
+    SLKCFLAGS="-O2 -fPIC"
+    LIBDIRSUFFIX="64"
+  else
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  fi
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc/xfce \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-debug \
+  --build=$TARGET || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* HACKING INSTALL NEWS README* THANKS TODO \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source.local/xfce/xfce4-notifyd/doinst.sh.gz b/source.local/xfce/xfce4-notifyd/doinst.sh.gz
new file mode 100644
index 0000000..c199330
--- /dev/null
+++ b/source.local/xfce/xfce4-notifyd/doinst.sh.gz
diff --git a/source.local/xfce/xfce4-notifyd/slack-desc b/source.local/xfce/xfce4-notifyd/slack-desc
new file mode 100644
index 0000000..1463db0
--- /dev/null
+++ b/source.local/xfce/xfce4-notifyd/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+             |-----handy-ruler------------------------------------------------------|
+xfce4-notifyd: xfce4-notifyd (Xfce Notify Daemon)
+xfce4-notifyd:
+xfce4-notifyd: Xfce4-notifyd is a simple, visually-appealing notification daemon
+xfce4-notifyd: for Xfce.  Applications can use xfce4-notifyd to pop up a notification
+xfce4-notifyd: bubble by sending messages through D-Bus.
+xfce4-notifyd:
+xfce4-notifyd: Homepage: http://spuriousinterrupt.org/projects/xfce4-notifyd
+xfce4-notifyd:
+xfce4-notifyd:
+xfce4-notifyd:
+xfce4-notifyd:
diff --git a/source.local/xfce/xfce4-notifyd/xfce4-notifyd.SlackBuild b/source.local/xfce/xfce4-notifyd/xfce4-notifyd.SlackBuild
new file mode 100755
index 0000000..e869113
--- /dev/null
+++ b/source.local/xfce/xfce4-notifyd/xfce4-notifyd.SlackBuild
@@ -0,0 +1,133 @@
+#!/bin/sh
+
+# Slackware build script for Xfce4-notifyd
+
+# Copyright 2008  Frank Caraballo <fecaraballo{at}gmail{dot}com>
+# Copyright 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+PKGNAM=xfce4-notifyd
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-2}
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+if [ -e $CWD/machine.conf ]; then
+  . $CWD/machine.conf ]
+elif [ -e /etc/slackbuild/machine.conf ]; then
+  . /etc/slackbuild/machine.conf ]
+else
+  # Automatically determine the architecture we're building on:
+  if [ -z "$ARCH" ]; then
+    case "$( uname -m )" in
+      i?86) export ARCH=i486 ;;
+      arm*) export ARCH=arm ;;
+      # Unless $ARCH is already set, use uname -m for all other archs:
+         *) export ARCH=$( uname -m ) ;;
+    esac
+  fi
+  # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
+  if [ "$ARCH" = "i486" ]; then
+    SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "s390" ]; then
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "x86_64" ]; then
+    SLKCFLAGS="-O2 -fPIC"
+    LIBDIRSUFFIX="64"
+  else
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  fi
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc/xfce \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --enable-debug=no \
+  --build=$TARGET || exit 1
+
+make $NUMJOBS || make || exit 1
+make install-strip DESTDIR=$PKG || exit 1
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* INSTALL NEWS README* TODO \
+    $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
+
diff --git a/source.local/xfce/xfce4-panel/slack-desc b/source.local/xfce/xfce4-panel/slack-desc
new file mode 100644
index 0000000..0711bf8
--- /dev/null
+++ b/source.local/xfce/xfce4-panel/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+           |-----handy-ruler------------------------------------------------------|
+xfce4-panel: xfce4-panel (panel for Xfce)
+xfce4-panel:
+xfce4-panel: The Xfce panel is part of the Xfce Desktop Environment and features
+xfce4-panel: program launchers, panel menus, a clock, a desktop switcher, and more.
+xfce4-panel: Many aspects of the panel can be configured through graphical dialogs,
+xfce4-panel: but also by GTK+ style properties and Xfconf settings.
+xfce4-panel:
+xfce4-panel:
+xfce4-panel:
+xfce4-panel:
+xfce4-panel:
diff --git a/source.local/xfce/xfce4-panel/xfce4-panel.SlackBuild b/source.local/xfce/xfce4-panel/xfce4-panel.SlackBuild
new file mode 100755
index 0000000..1ba4bb6
--- /dev/null
+++ b/source.local/xfce/xfce4-panel/xfce4-panel.SlackBuild
@@ -0,0 +1,145 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=xfce4-panel
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ -e $CWD/machine.conf ]; then
+  . $CWD/machine.conf ]
+elif [ -e /etc/slackbuild/machine.conf ]; then
+  . /etc/slackbuild/machine.conf ]
+else
+  # Automatically determine the architecture we're building on:
+  if [ -z "$ARCH" ]; then
+    case "$( uname -m )" in
+      i?86) export ARCH=i486 ;;
+      arm*) export ARCH=arm ;;
+      # Unless $ARCH is already set, use uname -m for all other archs:
+         *) export ARCH=$( uname -m ) ;;
+    esac
+  fi
+  # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
+  if [ "$ARCH" = "i486" ]; then
+    SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "s390" ]; then
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "x86_64" ]; then
+    SLKCFLAGS="-O2 -fPIC"
+    LIBDIRSUFFIX="64"
+  else
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  fi
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-debug \
+  --build=$TARGET || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source.local/xfce/xfce4-power-manager/doinst.sh.gz b/source.local/xfce/xfce4-power-manager/doinst.sh.gz
new file mode 100644
index 0000000..64bc078
--- /dev/null
+++ b/source.local/xfce/xfce4-power-manager/doinst.sh.gz
diff --git a/source.local/xfce/xfce4-power-manager/slack-desc b/source.local/xfce/xfce4-power-manager/slack-desc
new file mode 100644
index 0000000..8c79d3d
--- /dev/null
+++ b/source.local/xfce/xfce4-power-manager/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+                   |-----handy-ruler------------------------------------------------|
+xfce4-power-manager: xfce4-power-manager (Power Management Daemon for Xfce)
+xfce4-power-manager:
+xfce4-power-manager: xfce4-power-manager makes power management functions (such as
+xfce4-power-manager: suspend and hibernate) easy inside the Xfce Desktop Environment.
+xfce4-power-manager:
+xfce4-power-manager:
+xfce4-power-manager:
+xfce4-power-manager:
+xfce4-power-manager:
+xfce4-power-manager:
+xfce4-power-manager:
diff --git a/source.local/xfce/xfce4-power-manager/xfce4-power-manager.SlackBuild b/source.local/xfce/xfce4-power-manager/xfce4-power-manager.SlackBuild
new file mode 100755
index 0000000..cf1dc7a
--- /dev/null
+++ b/source.local/xfce/xfce4-power-manager/xfce4-power-manager.SlackBuild
@@ -0,0 +1,142 @@
+#!/bin/sh
+
+# Slackware build script for xfce4-power-manager
+
+# Copyright 2006-2012  Robby Workman  Northport, Alabama, USA
+# Copyright 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+PKGNAM=xfce4-power-manager
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+if [ -e $CWD/machine.conf ]; then
+  . $CWD/machine.conf ]
+elif [ -e /etc/slackbuild/machine.conf ]; then
+  . /etc/slackbuild/machine.conf ]
+else
+  # Automatically determine the architecture we're building on:
+  if [ -z "$ARCH" ]; then
+    case "$( uname -m )" in
+      i?86) export ARCH=i486 ;;
+      arm*) export ARCH=arm ;;
+      # Unless $ARCH is already set, use uname -m for all other archs:
+         *) export ARCH=$( uname -m ) ;;
+    esac
+  fi
+  # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
+  if [ "$ARCH" = "i486" ]; then
+    SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "s390" ]; then
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "x86_64" ]; then
+    SLKCFLAGS="-O2 -fPIC"
+    LIBDIRSUFFIX="64"
+  else
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  fi
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP || exit 1
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --enable-shared=yes \
+  --enable-static=no \
+  --enable-debug=no \
+  --enable-network-manager \
+  --build=$TARGET || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION/html
+cp -a \
+  AUTHORS COPYING* NEWS README* TODO \
+    $PKG/usr/doc/$PKGNAM-$VERSION
+( cd $PKG/usr/doc/$PKGNAM-$VERSION/html
+  ln -s /usr/share/xfce4/doc/C/xfce4-power-manager.html index.html
+  ln -s /usr/share/xfce4/doc/C/images .
+)
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source.local/xfce/xfce4-screenshooter/doinst.sh.gz b/source.local/xfce/xfce4-screenshooter/doinst.sh.gz
new file mode 100644
index 0000000..0edcbb3
--- /dev/null
+++ b/source.local/xfce/xfce4-screenshooter/doinst.sh.gz
diff --git a/source.local/xfce/xfce4-screenshooter/slack-desc b/source.local/xfce/xfce4-screenshooter/slack-desc
new file mode 100644
index 0000000..83eeaf7
--- /dev/null
+++ b/source.local/xfce/xfce4-screenshooter/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+                   |-----handy-ruler------------------------------------------------------|
+xfce4-screenshooter: xfce4-screenshooter (screenshooter plugin for Xfce)
+xfce4-screenshooter:
+xfce4-screenshooter: The screenshooter plugin adds a panel button that allows you to take
+xfce4-screenshooter: screenshots.
+xfce4-screenshooter:
+xfce4-screenshooter:
+xfce4-screenshooter:
+xfce4-screenshooter:
+xfce4-screenshooter:
+xfce4-screenshooter:
+xfce4-screenshooter:
diff --git a/source.local/xfce/xfce4-screenshooter/xfce4-screenshooter.SlackBuild b/source.local/xfce/xfce4-screenshooter/xfce4-screenshooter.SlackBuild
new file mode 100755
index 0000000..a801889
--- /dev/null
+++ b/source.local/xfce/xfce4-screenshooter/xfce4-screenshooter.SlackBuild
@@ -0,0 +1,142 @@
+#!/bin/sh
+
+# Slackware build script for xfce4-screenshooter
+
+# Copyright 2006-2012  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=xfce4-screenshooter
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+if [ -e $CWD/machine.conf ]; then
+  . $CWD/machine.conf ]
+elif [ -e /etc/slackbuild/machine.conf ]; then
+  . /etc/slackbuild/machine.conf ]
+else
+  # Automatically determine the architecture we're building on:
+  if [ -z "$ARCH" ]; then
+    case "$( uname -m )" in
+      i?86) export ARCH=i486 ;;
+      arm*) export ARCH=arm ;;
+      # Unless $ARCH is already set, use uname -m for all other archs:
+         *) export ARCH=$( uname -m ) ;;
+    esac
+  fi
+  # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
+  if [ "$ARCH" = "i486" ]; then
+    SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "s390" ]; then
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "x86_64" ]; then
+    SLKCFLAGS="-O2 -fPIC"
+    LIBDIRSUFFIX="64"
+  else
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  fi
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc/xfce \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --mandir=/usr/man \
+  --enable-shared=yes \
+  --enable-static=no \
+  --enable-debug=no \
+  --build=$TARGET || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* INSTALL NEWS README* \
+    $PKG/usr/doc/$PKGNAM-$VERSION
+
+if [ -d $PKG/usr/share/doc/xfce4-screenshooter ]; then # --docdir was ignored
+  mv $PKG/usr/share/doc/xfce4-screenshooter/* $PKG/usr/doc/$PKGNAM-$VERSION
+  ( cd $PKG/usr/share ; rmdir -p doc/xfce4-screenshooter )
+fi
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source.local/xfce/xfce4-screenshooter/xfce4-screenshooter.url b/source.local/xfce/xfce4-screenshooter/xfce4-screenshooter.url
new file mode 100644
index 0000000..48b2447
--- /dev/null
+++ b/source.local/xfce/xfce4-screenshooter/xfce4-screenshooter.url
@@ -0,0 +1 @@
+http://archive.xfce.org/src/apps/xfce4-screenshooter/
diff --git a/source.local/xfce/xfce4-session/slack-desc b/source.local/xfce/xfce4-session/slack-desc
new file mode 100644
index 0000000..235feb3
--- /dev/null
+++ b/source.local/xfce/xfce4-session/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+             |-----handy-ruler------------------------------------------------------|
+xfce4-session: xfce4-session (Xfce session manager)
+xfce4-session:
+xfce4-session: Xfce4-session is a session manager for Xfce.  Its task is to save the
+xfce4-session: state of your desktop (opened applications and their location) and
+xfce4-session: restore it during a next startup.  You can create several different
+xfce4-session: sessions and choose one of them on startup.
+xfce4-session:
+xfce4-session:
+xfce4-session:
+xfce4-session:
+xfce4-session:
diff --git a/source.local/xfce/xfce4-session/xfce4-session.SlackBuild b/source.local/xfce/xfce4-session/xfce4-session.SlackBuild
new file mode 100755
index 0000000..9e9826d
--- /dev/null
+++ b/source.local/xfce/xfce4-session/xfce4-session.SlackBuild
@@ -0,0 +1,148 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=xfce4-session
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ -e $CWD/machine.conf ]; then
+  . $CWD/machine.conf ]
+elif [ -e /etc/slackbuild/machine.conf ]; then
+  . /etc/slackbuild/machine.conf ]
+else
+  # Automatically determine the architecture we're building on:
+  if [ -z "$ARCH" ]; then
+    case "$( uname -m )" in
+      i?86) export ARCH=i486 ;;
+      arm*) export ARCH=arm ;;
+      # Unless $ARCH is already set, use uname -m for all other archs:
+         *) export ARCH=$( uname -m ) ;;
+    esac
+  fi
+  # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
+  if [ "$ARCH" = "i486" ]; then
+    SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "s390" ]; then
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "x86_64" ]; then
+    SLKCFLAGS="-O2 -fPIC"
+    LIBDIRSUFFIX="64"
+  else
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  fi
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+zcat $CWD/patches/load_systemwide_Xmodmap_file.diff.gz | patch -p1 || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --enable-libgnome-keyring \
+  --disable-static \
+  --disable-debug \
+  --build=$TARGET || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source.local/xfce/xfce4-settings/slack-desc b/source.local/xfce/xfce4-settings/slack-desc
new file mode 100644
index 0000000..590a3b3
--- /dev/null
+++ b/source.local/xfce/xfce4-settings/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+              |-----handy-ruler------------------------------------------------------|
+xfce4-settings: xfce4-settings (Xfce settings manager)
+xfce4-settings:
+xfce4-settings: xfce4-settings is the Xfce settings manager front-end.  It comes with
+xfce4-settings: several different components for configuring application-independent
+xfce4-settings: settings inside xfconf.
+xfce4-settings:
+xfce4-settings:
+xfce4-settings:
+xfce4-settings:
+xfce4-settings:
+xfce4-settings:
diff --git a/source.local/xfce/xfce4-settings/xfce4-settings.SlackBuild b/source.local/xfce/xfce4-settings/xfce4-settings.SlackBuild
new file mode 100755
index 0000000..92fb4bf
--- /dev/null
+++ b/source.local/xfce/xfce4-settings/xfce4-settings.SlackBuild
@@ -0,0 +1,150 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=xfce4-settings
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ -e $CWD/machine.conf ]; then
+  . $CWD/machine.conf ]
+elif [ -e /etc/slackbuild/machine.conf ]; then
+  . /etc/slackbuild/machine.conf ]
+else
+  # Automatically determine the architecture we're building on:
+  if [ -z "$ARCH" ]; then
+    case "$( uname -m )" in
+      i?86) export ARCH=i486 ;;
+      arm*) export ARCH=arm ;;
+      # Unless $ARCH is already set, use uname -m for all other archs:
+         *) export ARCH=$( uname -m ) ;;
+    esac
+  fi
+  # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
+  if [ "$ARCH" = "i486" ]; then
+    SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "s390" ]; then
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "x86_64" ]; then
+    SLKCFLAGS="-O2 -fPIC"
+    LIBDIRSUFFIX="64"
+  else
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  fi
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+zcat $CWD/xfce4-settings.theme.diff.gz | patch -p1 --verbose || exit 1
+zcat $CWD/xfce4-settings.xft.defaults.diff.gz | patch -p1 --verbose || exit 1
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --enable-pluggable-dialogs \
+  --enable-sound-settings \
+  --disable-static \
+  --disable-debug \
+  --build=$TARGET || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source.local/xfce/xfce4-settings/xfce4-settings.theme.diff.gz b/source.local/xfce/xfce4-settings/xfce4-settings.theme.diff.gz
new file mode 100644
index 0000000..ee09b03
--- /dev/null
+++ b/source.local/xfce/xfce4-settings/xfce4-settings.theme.diff.gz
diff --git a/source.local/xfce/xfce4-settings/xfce4-settings.xft.defaults.diff.gz b/source.local/xfce/xfce4-settings/xfce4-settings.xft.defaults.diff.gz
new file mode 100644
index 0000000..9260160
--- /dev/null
+++ b/source.local/xfce/xfce4-settings/xfce4-settings.xft.defaults.diff.gz
diff --git a/source.local/xfce/xfce4-systemload-plugin/slack-desc b/source.local/xfce/xfce4-systemload-plugin/slack-desc
new file mode 100644
index 0000000..e83e930
--- /dev/null
+++ b/source.local/xfce/xfce4-systemload-plugin/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+                       |-----handy-ruler------------------------------------------------------|
+xfce4-systemload-plugin: xfce4-systemload-plugin (systemload plugin for the Xfce panel)
+xfce4-systemload-plugin:
+xfce4-systemload-plugin: This plugin displays the current system load on the Xfce panel.
+xfce4-systemload-plugin:
+xfce4-systemload-plugin:
+xfce4-systemload-plugin:
+xfce4-systemload-plugin:
+xfce4-systemload-plugin:
+xfce4-systemload-plugin:
+xfce4-systemload-plugin:
+xfce4-systemload-plugin:
diff --git a/source.local/xfce/xfce4-systemload-plugin/xfce4-systemload-plugin.SlackBuild b/source.local/xfce/xfce4-systemload-plugin/xfce4-systemload-plugin.SlackBuild
new file mode 100755
index 0000000..f816a48
--- /dev/null
+++ b/source.local/xfce/xfce4-systemload-plugin/xfce4-systemload-plugin.SlackBuild
@@ -0,0 +1,120 @@
+#!/bin/sh
+
+# Slackware build script for xfce4-systemload-plugin
+
+# Copyright 2006-2012  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# Maintained by Ozan Turkyilmaz ozan.turkyilmaz@gmail.com
+
+PKGNAM=xfce4-systemload-plugin
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+if [ -e $CWD/machine.conf ]; then
+  . $CWD/machine.conf ]
+elif [ -e /etc/slackbuild/machine.conf ]; then
+  . /etc/slackbuild/machine.conf ]
+else
+  # Automatically determine the architecture we're building on:
+  if [ -z "$ARCH" ]; then
+    case "$( uname -m )" in
+      i?86) export ARCH=i486 ;;
+      arm*) export ARCH=arm ;;
+      # Unless $ARCH is already set, use uname -m for all other archs:
+         *) export ARCH=$( uname -m ) ;;
+    esac
+  fi
+  # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
+  if [ "$ARCH" = "i486" ]; then
+    SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "s390" ]; then
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "x86_64" ]; then
+    SLKCFLAGS="-O2 -fPIC"
+    LIBDIRSUFFIX="64"
+  else
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  fi
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc/xfce \
+  --enable-shared=yes \
+  --enable-static=no \
+  --enable-debug=no \
+  --build=$TARGET || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* INSTALL NEWS README* \
+    $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source.local/xfce/xfce4-systemload-plugin/xfce4-systemload-plugin.url b/source.local/xfce/xfce4-systemload-plugin/xfce4-systemload-plugin.url
new file mode 100644
index 0000000..17d17c5
--- /dev/null
+++ b/source.local/xfce/xfce4-systemload-plugin/xfce4-systemload-plugin.url
@@ -0,0 +1 @@
+http://archive.xfce.org/src/panel-plugins/xfce4-systemload-plugin/
diff --git a/source.local/xfce/xfce4-taskmanager/doinst.sh.gz b/source.local/xfce/xfce4-taskmanager/doinst.sh.gz
new file mode 100644
index 0000000..2fcebdd
--- /dev/null
+++ b/source.local/xfce/xfce4-taskmanager/doinst.sh.gz
diff --git a/source.local/xfce/xfce4-taskmanager/slack-desc b/source.local/xfce/xfce4-taskmanager/slack-desc
new file mode 100644
index 0000000..f4e05a1
--- /dev/null
+++ b/source.local/xfce/xfce4-taskmanager/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+                 |-----handy-ruler------------------------------------------------------|
+xfce4-taskmanager: xfce4-taskmanager (running apps / task manager application)
+xfce4-taskmanager:
+xfce4-taskmanager: xfce4-taskmanager shows a list of running apps (similar to the
+xfce4-taskmanager: task manager included with some other operating systems)  :)
+xfce4-taskmanager:
+xfce4-taskmanager: The taskmanager is started by running the command 'xfce4-taskmanager'
+xfce4-taskmanager:
+xfce4-taskmanager:
+xfce4-taskmanager:
+xfce4-taskmanager:
+xfce4-taskmanager:
diff --git a/source.local/xfce/xfce4-taskmanager/xfce4-taskmanager.SlackBuild b/source.local/xfce/xfce4-taskmanager/xfce4-taskmanager.SlackBuild
new file mode 100755
index 0000000..cbc4a58
--- /dev/null
+++ b/source.local/xfce/xfce4-taskmanager/xfce4-taskmanager.SlackBuild
@@ -0,0 +1,119 @@
+#!/bin/sh
+
+# Slackware build script for xfce4-taskmanager
+
+# Copyright 2006-2011  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=xfce4-taskmanager
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+if [ -e $CWD/machine.conf ]; then
+  . $CWD/machine.conf ]
+elif [ -e /etc/slackbuild/machine.conf ]; then
+  . /etc/slackbuild/machine.conf ]
+else
+  # Automatically determine the architecture we're building on:
+  if [ -z "$ARCH" ]; then
+    case "$( uname -m )" in
+      i?86) export ARCH=i486 ;;
+      arm*) export ARCH=arm ;;
+      # Unless $ARCH is already set, use uname -m for all other archs:
+         *) export ARCH=$( uname -m ) ;;
+    esac
+  fi
+  # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
+  if [ "$ARCH" = "i486" ]; then
+    SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "s390" ]; then
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "x86_64" ]; then
+    SLKCFLAGS="-O2 -fPIC"
+    LIBDIRSUFFIX="64"
+  else
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  fi
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc/xfce \
+  --enable-shared=yes \
+  --enable-static=no \
+  --enable-debug=no \
+  --build=$TARGET || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* INSTALL NEWS README* \
+    $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source.local/xfce/xfce4-taskmanager/xfce4-taskmanager.url b/source.local/xfce/xfce4-taskmanager/xfce4-taskmanager.url
new file mode 100644
index 0000000..7cefa66
--- /dev/null
+++ b/source.local/xfce/xfce4-taskmanager/xfce4-taskmanager.url
@@ -0,0 +1 @@
+http://archive.xfce.org/src/apps/xfce4-taskmanager
diff --git a/source.local/xfce/xfce4-terminal/slack-desc b/source.local/xfce/xfce4-terminal/slack-desc
new file mode 100644
index 0000000..a76b06b
--- /dev/null
+++ b/source.local/xfce/xfce4-terminal/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+              |-----handy-ruler------------------------------------------------------|
+xfce4-terminal: xfce4-terminal (Xfce's Terminal Emulator)
+xfce4-terminal:
+xfce4-terminal: This is the Xfce terminal emulator application.  xfce4-terminal is 
+xfce4-terminal: a lightweight and easy to use terminal emulator for the X windowing
+xfce4-terminal: system, with some new ideas and features that make it unique among 
+xfce4-terminal: X terminal emulators.
+xfce4-terminal:
+xfce4-terminal:
+xfce4-terminal:
+xfce4-terminal:
+xfce4-terminal:
diff --git a/source.local/xfce/xfce4-terminal/xfce4-terminal.SlackBuild b/source.local/xfce/xfce4-terminal/xfce4-terminal.SlackBuild
new file mode 100755
index 0000000..fd16a55
--- /dev/null
+++ b/source.local/xfce/xfce4-terminal/xfce4-terminal.SlackBuild
@@ -0,0 +1,134 @@
+#!/bin/sh
+
+# Slackware build script for xfce4-terminal
+
+# Copyright 2010,2011,2012  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=xfce4-terminal
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ -e $CWD/machine.conf ]; then
+  . $CWD/machine.conf ]
+elif [ -e /etc/slackbuild/machine.conf ]; then
+  . /etc/slackbuild/machine.conf ]
+else
+  # Automatically determine the architecture we're building on:
+  if [ -z "$ARCH" ]; then
+    case "$( uname -m )" in
+      i?86) export ARCH=i486 ;;
+      arm*) export ARCH=arm ;;
+      # Unless $ARCH is already set, use uname -m for all other archs:
+         *) export ARCH=$( uname -m ) ;;
+    esac
+  fi
+  # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
+  if [ "$ARCH" = "i486" ]; then
+    SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "s390" ]; then
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "x86_64" ]; then
+    SLKCFLAGS="-O2 -fPIC"
+    LIBDIRSUFFIX="64"
+  else
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  fi
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc/xfce \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-debug \
+  --build=$TARGET || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* HACKING INSTALL NEWS README* THANKS TODO \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source.local/xfce/xfce4-volumed/slack-desc b/source.local/xfce/xfce4-volumed/slack-desc
new file mode 100644
index 0000000..e9266cb
--- /dev/null
+++ b/source.local/xfce/xfce4-volumed/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+             |-----handy-ruler------------------------------------------------------|
+xfce4-volumed: xfce4-volumed (audio volume management daemon)
+xfce4-volumed:
+xfce4-volumed: This daemon is responsible for making the volume up/down and mute 
+xfce4-volumed: keys of the keyboard work automatically, and uses the XFCE mixer's 
+xfce4-volumed: defined card and track for choosing which track to act on. 
+xfce4-volumed:
+xfce4-volumed: It also provides volume change and mute toggle notifications if 
+xfce4-volumed: a notification daemon is running (using libnotify).
+xfce4-volumed:
+xfce4-volumed: Homepage: https://launchpad.net/xfce4-volumed
+xfce4-volumed:
diff --git a/source.local/xfce/xfce4-volumed/xfce4-volumed.SlackBuild b/source.local/xfce/xfce4-volumed/xfce4-volumed.SlackBuild
new file mode 100755
index 0000000..44e73a1
--- /dev/null
+++ b/source.local/xfce/xfce4-volumed/xfce4-volumed.SlackBuild
@@ -0,0 +1,119 @@
+#!/bin/sh
+
+# Slackware build script for xfce4-volumed
+
+# Copyright 2006-2011  Robby Workman  Northport, Alabama, USA
+# Copyright 2009  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+PKGNAM=xfce4-volumed
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+if [ -e $CWD/machine.conf ]; then
+  . $CWD/machine.conf ]
+elif [ -e /etc/slackbuild/machine.conf ]; then
+  . /etc/slackbuild/machine.conf ]
+else
+  # Automatically determine the architecture we're building on:
+  if [ -z "$ARCH" ]; then
+    case "$( uname -m )" in
+      i?86) export ARCH=i486 ;;
+      arm*) export ARCH=arm ;;
+      # Unless $ARCH is already set, use uname -m for all other archs:
+         *) export ARCH=$( uname -m ) ;;
+    esac
+  fi
+  # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
+  if [ "$ARCH" = "i486" ]; then
+    SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "s390" ]; then
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "x86_64" ]; then
+    SLKCFLAGS="-O2 -fPIC"
+    LIBDIRSUFFIX="64"
+  else
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  fi
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --enable-debug=no \
+  --build=$TARGET || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* INSTALL NEWS README* THANKS \
+    $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source.local/xfce/xfce4-weather-plugin/slack-desc b/source.local/xfce/xfce4-weather-plugin/slack-desc
new file mode 100644
index 0000000..7d9b067
--- /dev/null
+++ b/source.local/xfce/xfce4-weather-plugin/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+                    |-----handy-ruler------------------------------------------------------|
+xfce4-weather-plugin: xfce4-weather-plugin (weather plugin for the Xfce panel)
+xfce4-weather-plugin:
+xfce4-weather-plugin: The weather plugin displays current weather conditions and forecasts.
+xfce4-weather-plugin:
+xfce4-weather-plugin:
+xfce4-weather-plugin:
+xfce4-weather-plugin:
+xfce4-weather-plugin:
+xfce4-weather-plugin:
+xfce4-weather-plugin:
+xfce4-weather-plugin:
diff --git a/source.local/xfce/xfce4-weather-plugin/xfce4-weather-plugin.SlackBuild b/source.local/xfce/xfce4-weather-plugin/xfce4-weather-plugin.SlackBuild
new file mode 100755
index 0000000..c0b63e7
--- /dev/null
+++ b/source.local/xfce/xfce4-weather-plugin/xfce4-weather-plugin.SlackBuild
@@ -0,0 +1,119 @@
+#!/bin/sh
+
+# Slackware build script for xfce4-weather-plugin
+
+# Copyright 2006-2012  Robby Workman, Northport, Alabama, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=xfce4-weather-plugin
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+if [ -e $CWD/machine.conf ]; then
+  . $CWD/machine.conf ]
+elif [ -e /etc/slackbuild/machine.conf ]; then
+  . /etc/slackbuild/machine.conf ]
+else
+  # Automatically determine the architecture we're building on:
+  if [ -z "$ARCH" ]; then
+    case "$( uname -m )" in
+      i?86) export ARCH=i486 ;;
+      arm*) export ARCH=arm ;;
+      # Unless $ARCH is already set, use uname -m for all other archs:
+         *) export ARCH=$( uname -m ) ;;
+    esac
+  fi
+  # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
+  if [ "$ARCH" = "i486" ]; then
+    SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "s390" ]; then
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "x86_64" ]; then
+    SLKCFLAGS="-O2 -fPIC"
+    LIBDIRSUFFIX="64"
+  else
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  fi
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+GEONAMES_USERNAME="slackware" \
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc/xfce \
+  --enable-shared=yes \
+  --enable-static=no \
+  --enable-debug=no \
+  --build=$TARGET || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* INSTALL NEWS README* TODO \
+    $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source.local/xfce/xfce4-weather-plugin/xfce4-weather-plugin.url b/source.local/xfce/xfce4-weather-plugin/xfce4-weather-plugin.url
new file mode 100644
index 0000000..9ee0ef0
--- /dev/null
+++ b/source.local/xfce/xfce4-weather-plugin/xfce4-weather-plugin.url
@@ -0,0 +1 @@
+http://archive.xfce.org/src/panel-plugins/xfce4-weather-plugin/
diff --git a/source.local/xfce/xfconf/slack-desc b/source.local/xfce/xfconf/slack-desc
new file mode 100644
index 0000000..a48abb4
--- /dev/null
+++ b/source.local/xfce/xfconf/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+xfconf: xfconf (Xfce configuration storage system)
+xfconf:
+xfconf: A daemon and query system for managing the storage and retrieval of
+xfconf: settings for the Xfce Desktop Environment, both graphically as well as
+xfconf: from the command line.
+xfconf:
+xfconf:
+xfconf:
+xfconf:
+xfconf:
+xfconf:
diff --git a/source.local/xfce/xfconf/xfconf.SlackBuild b/source.local/xfce/xfconf/xfconf.SlackBuild
new file mode 100755
index 0000000..c63bb40
--- /dev/null
+++ b/source.local/xfce/xfconf/xfconf.SlackBuild
@@ -0,0 +1,145 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=xfconf
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ -e $CWD/machine.conf ]; then
+  . $CWD/machine.conf ]
+elif [ -e /etc/slackbuild/machine.conf ]; then
+  . /etc/slackbuild/machine.conf ]
+else
+  # Automatically determine the architecture we're building on:
+  if [ -z "$ARCH" ]; then
+    case "$( uname -m )" in
+      i?86) export ARCH=i486 ;;
+      arm*) export ARCH=arm ;;
+      # Unless $ARCH is already set, use uname -m for all other archs:
+         *) export ARCH=$( uname -m ) ;;
+    esac
+  fi
+  # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
+  if [ "$ARCH" = "i486" ]; then
+    SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "s390" ]; then
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "x86_64" ]; then
+    SLKCFLAGS="-O2 -fPIC"
+    LIBDIRSUFFIX="64"
+  else
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  fi
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-debug \
+  --build=$TARGET || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source.local/xfce/xfdesktop/slack-desc b/source.local/xfce/xfdesktop/slack-desc
new file mode 100644
index 0000000..e98b02b
--- /dev/null
+++ b/source.local/xfce/xfdesktop/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+         |-----handy-ruler------------------------------------------------------|
+xfdesktop: xfdesktop (Xfce desktop manager)
+xfdesktop:
+xfdesktop: Xfdesktop is a desktop manager for the Xfce Desktop Environment.
+xfdesktop: Desktop in this respect means the root window.  The manager handles
+xfdesktop: tasks such as the background image and color, the root menu and window
+xfdesktop: list, minimized application icons, and file icons on the desktop.
+xfdesktop:
+xfdesktop:
+xfdesktop:
+xfdesktop:
+xfdesktop:
diff --git a/source.local/xfce/xfdesktop/xfdesktop.SlackBuild b/source.local/xfce/xfdesktop/xfdesktop.SlackBuild
new file mode 100755
index 0000000..6963160
--- /dev/null
+++ b/source.local/xfce/xfdesktop/xfdesktop.SlackBuild
@@ -0,0 +1,145 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=xfdesktop
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ -e $CWD/machine.conf ]; then
+  . $CWD/machine.conf ]
+elif [ -e /etc/slackbuild/machine.conf ]; then
+  . /etc/slackbuild/machine.conf ]
+else
+  # Automatically determine the architecture we're building on:
+  if [ -z "$ARCH" ]; then
+    case "$( uname -m )" in
+      i?86) export ARCH=i486 ;;
+      arm*) export ARCH=arm ;;
+      # Unless $ARCH is already set, use uname -m for all other archs:
+         *) export ARCH=$( uname -m ) ;;
+    esac
+  fi
+  # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
+  if [ "$ARCH" = "i486" ]; then
+    SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "s390" ]; then
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "x86_64" ]; then
+    SLKCFLAGS="-O2 -fPIC"
+    LIBDIRSUFFIX="64"
+  else
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  fi
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-debug \
+  --build=$TARGET || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source.local/xfce/xfwm4-themes/slack-desc b/source.local/xfce/xfwm4-themes/slack-desc
new file mode 100644
index 0000000..dca6ee9
--- /dev/null
+++ b/source.local/xfce/xfwm4-themes/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+            |-----handy-ruler------------------------------------------------------|
+xfwm4-themes: xfwm4-themes (themes for the Xfce window manager)
+xfwm4-themes:
+xfwm4-themes: This package contains a wide variety of themes for xfwm4, the window
+xfwm4-themes: manager of the Xfce4 project.  If the default theme is not to your
+xfwm4-themes: liking, you'll probably find the eyecandy you're looking for here.
+xfwm4-themes:
+xfwm4-themes:
+xfwm4-themes:
+xfwm4-themes:
+xfwm4-themes:
+xfwm4-themes:
diff --git a/source.local/xfce/xfwm4-themes/xfwm4-themes.SlackBuild b/source.local/xfce/xfwm4-themes/xfwm4-themes.SlackBuild
new file mode 100755
index 0000000..b7f42f0
--- /dev/null
+++ b/source.local/xfce/xfwm4-themes/xfwm4-themes.SlackBuild
@@ -0,0 +1,145 @@
+#!/bin/sh
+
+# Copyright 2012  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=xfwm4-themes
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ -e $CWD/machine.conf ]; then
+  . $CWD/machine.conf ]
+elif [ -e /etc/slackbuild/machine.conf ]; then
+  . /etc/slackbuild/machine.conf ]
+else
+  # Automatically determine the architecture we're building on:
+  if [ -z "$ARCH" ]; then
+    case "$( uname -m )" in
+      i?86) export ARCH=i486 ;;
+      arm*) export ARCH=arm ;;
+      # Unless $ARCH is already set, use uname -m for all other archs:
+         *) export ARCH=$( uname -m ) ;;
+    esac
+  fi
+  # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
+  if [ "$ARCH" = "i486" ]; then
+    SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "s390" ]; then
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "x86_64" ]; then
+    SLKCFLAGS="-O2 -fPIC"
+    LIBDIRSUFFIX="64"
+  else
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  fi
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-debug \
+  --build=$TARGET || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source.local/xfce/xfwm4/slack-desc b/source.local/xfce/xfwm4/slack-desc
new file mode 100644
index 0000000..89db3f5
--- /dev/null
+++ b/source.local/xfce/xfwm4/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+     |-----handy-ruler------------------------------------------------------|
+xfwm4: xfwm4 (Xfce Window Manager)
+xfwm4:
+xfwm4: This package contains xfwm4 which is the window manager for Xfce4.
+xfwm4: It is designed to run with the rest of Xfce, but it also makes a
+xfwm4: capable window manager for any X11 environment.
+xfwm4:
+xfwm4:
+xfwm4:
+xfwm4:
+xfwm4:
+xfwm4:
diff --git a/source.local/xfce/xfwm4/xfwm.gtk3.099614e3f045e06db7ab509e174510ea74857adb.diff.gz b/source.local/xfce/xfwm4/xfwm.gtk3.099614e3f045e06db7ab509e174510ea74857adb.diff.gz
new file mode 100644
index 0000000..0df6974
--- /dev/null
+++ b/source.local/xfce/xfwm4/xfwm.gtk3.099614e3f045e06db7ab509e174510ea74857adb.diff.gz
diff --git a/source.local/xfce/xfwm4/xfwm4.SlackBuild b/source.local/xfce/xfwm4/xfwm4.SlackBuild
new file mode 100755
index 0000000..d5ff2da
--- /dev/null
+++ b/source.local/xfce/xfwm4/xfwm4.SlackBuild
@@ -0,0 +1,151 @@
+#!/bin/sh
+
+# Copyright 2012, 2013  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=xfwm4
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-3}
+
+NUMJOBS=${NUMJOBS:--j6}
+
+if [ -e $CWD/machine.conf ]; then
+  . $CWD/machine.conf ]
+elif [ -e /etc/slackbuild/machine.conf ]; then
+  . /etc/slackbuild/machine.conf ]
+else
+  # Automatically determine the architecture we're building on:
+  if [ -z "$ARCH" ]; then
+    case "$( uname -m )" in
+      i?86) export ARCH=i486 ;;
+      arm*) export ARCH=arm ;;
+      # Unless $ARCH is already set, use uname -m for all other archs:
+         *) export ARCH=$( uname -m ) ;;
+    esac
+  fi
+  # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
+  if [ "$ARCH" = "i486" ]; then
+    SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "s390" ]; then
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  elif [ "$ARCH" = "x86_64" ]; then
+    SLKCFLAGS="-O2 -fPIC"
+    LIBDIRSUFFIX="64"
+  else
+    SLKCFLAGS="-O2"
+    LIBDIRSUFFIX=""
+  fi
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+zcat $CWD/xfwm.gtk3.099614e3f045e06db7ab509e174510ea74857adb.diff.gz | patch -p1 --verbose || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-static \
+  --disable-debug \
+  --build=$TARGET || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+mkdir -p $PKG/etc/X11/xinit
+cat $CWD/xinitrc.xfce > $PKG/etc/X11/xinit/xinitrc.xfce
+chmod 0755 $PKG/etc/X11/xinit/*
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# We don't want icon caches:
+find $PKG/usr/share/icons -type f -name "icon-theme.cache" -exec rm -f {} \;
+
+# Add a documentation directory.  Not all of these files are expected to be
+# present, but listing them ensures that documentation that might appear and
+# disappear from version to version will not be missed.
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS BUGS COMPOSITOR COPYING* FAQ HACKING INSTALL \
+  NEWS NOTES README* THANKS TODO example.gtkrc-2.0 \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source.local/xfce/xfwm4/xinitrc.xfce b/source.local/xfce/xfwm4/xinitrc.xfce
new file mode 100644
index 0000000..82c0dd4
--- /dev/null
+++ b/source.local/xfce/xfwm4/xinitrc.xfce
@@ -0,0 +1,40 @@
+#!/bin/sh
+#  xinitrc.xfce - modified to work around xfce4session bug
+#                 https://bugzilla.xfce.org/show_bug.cgi?id=8841
+
+
+########################################################################
+##  Merge in defaults and keymaps                                     ##
+########################################################################
+
+userresources=$HOME/.Xresources
+usermodmap=$HOME/.Xmodmap
+sysresources=/etc/X11/xinit/.Xresources
+sysmodmap=/etc/X11/xinit/.Xmodmap
+
+if [ -f $sysresources ]; then
+    /usr/bin/xrdb -merge $sysresources
+fi
+
+if [ -f $sysmodmap ]; then
+    /usr/bin/xmodmap $sysmodmap
+fi
+
+if [ -f $userresources ]; then
+    /usr/bin/xrdb -merge $userresources
+fi
+
+if [ -f $usermodmap ]; then
+    /usr/bin/xmodmap $usermodmap
+fi
+
+########################################################################
+##  Start xfce Desktop Environment                                    ##
+########################################################################
+
+if [ -z "$DESKTOP_SESSION" -a -x /usr/bin/ck-launch-session ]; then
+  exec ck-launch-session dbus-launch --exit-with-session /usr/bin/startxfce4
+else
+  exec dbus-launch --exit-with-session /usr/bin/startxfce4
+fi
+