Initial revision

3 files changed, 368 insertions, 0 deletions

diff --git a/heartbeat/build/heartbeat.SlackBuild b/heartbeat/build/heartbeat.SlackBuild
new file mode 100755
index 00000000..65546791
--- /dev/null
+++ b/heartbeat/build/heartbeat.SlackBuild
@@ -0,0 +1,348 @@
+#!/bin/sh
+# $Id$
+# Copyright (c) 2007 Eric Hameleers <alien@slackware.com>
+# -----------------------------------------------------------------------------
+#
+# Slackware SlackBuild script 
+# ===========================
+# By:        Eric Hameleers <alien@slackware.com>
+# For:       heartbeat
+# Descr:     Heartbeat subsystem for High-Availability Linux
+# URL:       http://linux-ha.org/Heartbeat
+# Needs:     libnet
+# Changelog:
+# 2.0.8-1:   12/Jan/2007 by Eric Hameleers <alien@slackware.com>
+#            * Initial build.
+# 
+# Run 'sh heartbeat.SlackBuild --cleanup' to build a Slackware package.
+# The package (.tgz) plus descriptive .txt file are created in /tmp .
+# Install using 'installpkg'. 
+#
+# -----------------------------------------------------------------------------
+
+# --- INIT ---
+# Set initial variables:
+
+PRGNAM=heartbeat
+VERSION=${VERSION:-2.0.8}
+ARCH=${ARCH:-i486}
+BUILD=${BUILD:-1}
+
+# the user:group "hacluster:haclient" uses the id's "90:90" in the RPMs that
+# Heartbeat creates. Try to keep to the sames idnumbers here:
+HUID=90
+HGID=90
+
+# Not used, heartbeat's build script does it well enough:
+#DOCS=""
+
+# Where do we look for sources?
+CWD=`pwd`
+SRCDIR=`dirname $0`
+[ "${SRCDIR:0:1}" == "." ] && SRCDIR=${CWD}/${SRCDIR}
+
+# Place to build (TMP) package (PKG) and output (OUTPUT) the program:
+TMP=${TMP:-/tmp/build}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+# Input URL: http://linux-ha.org/download/heartbeat-2.0.8.tar.gz
+SOURCE="$SRCDIR/${PRGNAM}-${VERSION}.tar.gz"
+SRCURL="http://linux-ha.org/download/${PRGNAM}-${VERSION}.tar.gz"
+
+##
+## --- with a little luck, you won't have to edit below this point --- ##
+##
+
+# Exit the script on errors:
+set -e
+trap 'echo "$0 FAILED at line $LINENO!" | tee $OUTPUT/error-${PRGNAM}.log' ERR
+# Catch unitialized variables:
+set -u
+P1=${1:-1}
+
+# Slackware 11 and up need other option (gcc > 3.3.x)
+if [ `gcc -dumpversion | tr -d  '.' |cut -c 1-2` -gt 33 ]; then
+  MOPT=tune
+else
+  MOPT=cpu
+fi
+
+case "$ARCH" in
+  i386)      SLKCFLAGS="-O2 -march=i386 -m${MOPT}=i686"
+             SLKLDFLAGS=""; LIBDIRSUFFIX=""
+             ;;
+  i486)      SLKCFLAGS="-O2 -march=i486 -m${MOPT}=i686"
+             SLKLDFLAGS=""; LIBDIRSUFFIX=""
+             ;;
+  s390)      SLKCFLAGS="-O2"
+             SLKLDFLAGS=""; LIBDIRSUFFIX=""
+             ;;
+  powerpc)   SLKCFLAGS="-O2"
+             SLKLDFLAGS=""; LIBDIRSUFFIX=""
+             ;;
+  x86_64)    SLKCFLAGS="-O2 -fPIC"
+             SLKLDFLAGS="-L/usr/lib64"; LIBDIRSUFFIX="64"
+             ;;
+  athlon-xp) SLKCFLAGS="-march=athlon-xp -O3 -pipe -fomit-frame-pointer"
+             SLKLDFLAGS=""; LIBDIRSUFFIX=""
+             ;;
+esac
+
+if [ ! -d $TMP/tmp-$PRGNAM ]; then
+  mkdir -p $TMP/tmp-$PRGNAM # location to build the source
+elif [ "$P1" != "--oldbuild" ]; then
+  # If the "--oldbuild" parameter is present, we keep
+  #  the old build files and continue;
+  # By default we remove the remnants of previous build and continue:
+  rm -rf $TMP/tmp-$PRGNAM/*
+fi
+
+if [ ! -d $PKG ]; then
+  mkdir -p $PKG  # place for the package to be built
+else
+  rm -rf $PKG/*  # We always erase old package's contents:
+fi
+
+if [ ! -d $OUTPUT ]; then
+  mkdir -p $OUTPUT  # place for the package to be saved
+fi
+
+
+# --- SOURCE FILE AVAILABILITY ---
+
+if ! [ -f ${SOURCE} ]; then
+  if ! [ "x${SRCURL}" == "x" ]; then
+    # Check if the $SRCDIR is writable at all - if not, download to $OUTPUT
+    [ -w "$SRCDIR" ] || SOURCE="$OUTPUT/`basename $SOURCE`"
+    echo "Source '`basename ${SOURCE}`' not available yet..."
+    echo "Will download file to `dirname $SOURCE`"
+    wget -nv -O "${SOURCE}" "${SRCURL}" || true
+    if [ $? -ne 0 ]; then
+      echo "Downloading '`basename ${SOURCE}`' failed... aborting the build."
+      mv -f "${SOURCE}" "${SOURCE}".FAIL
+      exit 1
+    fi
+  else
+    echo "File '`basename ${SOURCE}`' not available... aborting the build."
+    exit 1
+  fi
+fi
+
+if [ "$P1" == "--download" ]; then
+  echo "Download complete."
+  exit 0
+fi
+
+# --- PACKAGE BUILDING ---
+
+echo "++"
+echo "|| $PRGNAM-$VERSION"
+echo "++"
+
+cd $PKG
+
+# Explode the package framework:
+if [ -f $SRCDIR/_$PRGNAM.tar.gz ]; then
+  explodepkg $SRCDIR/_$PRGNAM.tar.gz
+fi
+
+cd $TMP/tmp-$PRGNAM
+
+
+# --- TARBALL EXTRACTION,PATCH,MODIFY ---
+
+echo "Extracting the source archive(s) for $PRGNAM..."
+if `file ${SOURCE} | grep -q ": bzip2"`; then
+  tar -xjvf ${SOURCE}
+elif `file ${SOURCE} | grep -qi ": zip"`; then
+  unzip ${SOURCE}
+elif `file ${SOURCE} | grep -qi ": 7-zip"`; then
+  7za -x ${SOURCE}
+else
+  tar -xzvf ${SOURCE}
+fi
+if [ -d ${PRGNAM}-${VERSION} ]; then
+  cd ${PRGNAM}-${VERSION}
+else
+  cd  ${PRGNAM}*  # a little less specific
+fi
+
+chown -R root.root *
+chmod -R u+w,go+r-w,a-s .
+
+
+# --- BUILDING ---
+
+echo Building ...
+
+LDFLAGS="$SLKLDFLAGS" \
+CFLAGS="$SLKCFLAGS" \
+./configure --prefix=/usr \
+            --libdir=/usr/lib${LIBDIRSUFFIX} \
+            --localstatedir=/var \
+            --sysconfdir=/etc \
+            --with-group-id=${HGID} --with-ccmuser-id=${HUID} \
+            --enable-snmp \
+            --enable-bundled_ltdl \
+            --with-initdir=/etc/rc.d
+            --program-prefix="" \
+            --program-suffix="" \
+            $ARCH-slackware-linux \
+            2>&1 | tee $OUTPUT/configure-${PRGNAM}.log
+            # The management GUI needs PAM and GnuTLS...
+            #--enable-mgmt \
+
+make 2>&1 | tee $OUTPUT/make-${PRGNAM}.log
+
+#
+# Install all the needed stuff to the package dir
+#
+# Use installwatch if available, to produce a logfile of the installation
+# process that is more easily readable:
+if `which installwatch  > /dev/null 2>&1`; then
+  installwatch -o $OUTPUT/install-${PRGNAM}.log make DESTDIR=$PKG install
+else
+  make DESTDIR=$PKG install 2>&1 |tee $OUTPUT/install-${PRGNAM}.log
+fi
+
+# Add a symlink for ldirectord
+ln -s /sbin/ldirectord $PKG/etc/ha.d/resource.d/ldirectord
+
+# Create Slackware rc script names:
+mv $PKG/etc/rc.d/heartbeat $PKG/etc/rc.d/rc.heartbeat.new
+mv $PKG/etc/rc.d/ldirectord $PKG/etc/rc.d/rc.ldirectord.new
+
+# Add this to the doinst.sh
+! [ -d $PKG/install ] && mkdir -p $PKG/install
+cat <<EOINS >> $PKG/install/doinst.sh
+# Handle the incoming configuration files:
+config() {
+  for infile in \$1; do
+    NEW="\$infile"
+    OLD="\`dirname \$NEW\`/\`basename \$NEW .new\`"
+    # If there's no config file by that name, mv it over:
+    if [ ! -r \$OLD ]; then
+      mv \$NEW \$OLD
+    elif [ "\`cat \$OLD | md5sum\`" = "\`cat \$NEW | md5sum\`" ]; then
+      # toss the redundant copy
+      rm \$NEW
+    fi
+    # Otherwise, we leave the .new copy for the admin to consider...
+  done
+}
+
+config etc/rc.d/rc.heartbeat.new
+config etc/rc.d/rc.ldirectord.new
+
+# Create heartbeat user/group :
+if chroot . getent group haclient >/dev/null
+then
+  : OK group haclient already present
+else
+  GROUPOPT="-g $HGID"
+  if chroot . groupadd \$GROUPOPT haclient 2>/dev/null
+  then
+    : OK we were able to add group haclient
+  else
+    chroot . groupadd haclient
+  fi
+fi
+
+if chroot . getent passwd hacluster >/dev/null
+then
+  : OK user hacluster already present
+else
+  USEROPT="-g haclient -u $HUID -d /var/lib/heartbeat/cores/hacluster"
+  if chroot . useradd \$USEROPT hacluster 2>/dev/null
+  then
+    : OK we were able to add user hacluster
+  else
+    chroot . useradd hacluster
+  fi
+fi
+
+# Now, set the correct permissions on the installed stuff:
+chown root: /var/lib/heartbeat/cores/root
+chmod 0700 /var/lib/heartbeat/cores/root
+
+chown nobody: /var/lib/heartbeat/cores/nobody
+chmod 0700 /var/lib/heartbeat/cores/nobody
+
+chown hacluster: /var/lib/heartbeat/cores/hacluster
+chmod 0700 /var/lib/heartbeat/cores/hacluster
+
+chown hacluster:haclient /usr/bin/cl_status
+chmod 2555 /usr/bin/cl_status
+
+chown hacluster:haclient /var/run/heartbeat/ccm
+chmod 750 /var/run/heartbeat/ccm
+
+chown hacluster:haclient /var/run/heartbeat/crm
+chmod 750 /var/run/heartbeat/crm
+
+chown hacluster:haclient /var/lib/heartbeat/pengine
+chmod 750 /var/lib/heartbeat/pengine
+
+EOINS
+
+
+# --- DOCUMENTATION ---
+
+mv $PKG/usr/share/doc $PKG/usr/
+chmod -R a-w $PKG/usr/doc/$PRGNAM-$VERSION/*
+
+# Move incorrectly installed man pages, if any
+[ -d $PKG/usr/share/man ] && \
+  mv $PKG/usr/share/man $PKG/usr/ && rmdir $PKG/usr/share || true
+# Compress the man page(s)
+if [ -d $PKG/usr/man ]; then
+  find $PKG/usr/man -type f -name "*.?" -exec gzip -9f {} \;
+  for i in `find $PKG/usr/man -type l -name "*.?"` ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+fi
+rmdir $PKG/usr/share || true
+
+# Strip binaries
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+
+# --- OWNERSHIP, RIGHTS ---
+
+chmod -R o-w $PKG
+
+
+# --- PACKAGE DESCRIPTION ---
+
+mkdir -p $PKG/install
+cat $SRCDIR/slack-desc > $PKG/install/slack-desc
+if [ -f $SRCDIR/doinst.sh ]; then
+  cat $SRCDIR/doinst.sh >> $PKG/install/doinst.sh
+fi
+if [ -f $SRCDIR/slack-required ]; then
+  cat $SRCDIR/slack-required > $PKG/install/slack-required
+fi
+
+
+# --- BUILDING ---
+
+# Build the package:
+cd $PKG
+makepkg --linkadd y --chown n $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}.tgz \
+  2>&1 | tee $OUTPUT/makepkg-${PRGNAM}.log
+(cd $OUTPUT && md5sum ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}.tgz > ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}.tgz.md5)
+cat $PKG/install/slack-desc | grep "^${PRGNAM}" > $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}.txt
+if [ -f $PKG/install/slack-required ]; then
+  cat $PKG/install/slack-required > $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}.dep
+fi
+
+
+# --- CLEANUP ---
+
+# Clean up the extra stuff:
+if [ "$P1" = "--cleanup" ]; then
+  rm -rf $TMP/tmp-$PRGNAM
+  rm -rf $PKG
+fi
diff --git a/heartbeat/build/slack-desc b/heartbeat/build/slack-desc
new file mode 100644
index 00000000..12a7c06e
--- /dev/null
+++ b/heartbeat/build/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+         |-----handy-ruler------------------------------------------------------|
+heartbeat: heartbeat (Heartbeat subsystem for High-Availability Linux)
+heartbeat:
+heartbeat: heartbeat is a basic high-availability subsystem for Linux-HA.
+heartbeat: It will run scripts at initialization, and when machines go up or
+heartbeat: down. This version will also perform IP address takeover using
+heartbeat: gratuitous ARPs. It works correctly for a 2-node configuration,
+heartbeat: and is extensible to larger configurations.
+heartbeat:
+heartbeat:
+heartbeat: heartbeat home: http://linux-ha.org/Heartbeat
+heartbeat:
diff --git a/heartbeat/build/slack-required b/heartbeat/build/slack-required
new file mode 100644
index 00000000..f15992ee
--- /dev/null
+++ b/heartbeat/build/slack-required
@@ -0,0 +1 @@
+libnet